Acceptance criteria for the Mark I containment long term program.

Vacuum relief system for boiling water reactor Mark I and Mark II containments.
Published: (1985)

Modification of vacuum breakers on Mark I containments.
Published: (1983)

Containment liner corrosion.
Published: (2010)

Summary of meetings held on April 22 & 23, 1980 with representatives of the Mark I owners group.
Published: (1980)

Mark II generic acceptance criteria for lead plants.
Published: (1978)

Inoperable containment atmosphere sensing systems.
Published: (1983)

Potential blockage of safety-related strainers by material brought inside containment.
Published: (1995)

The Role of nuclear reactor containment in severe accidents : report /
Published: (1989)

Corrosion of steel containment and containment liner.
Published: (2004)

Degradation of leak-chase channel systems for floor welds of metal containment shell and concrete containment metallic liner.
Published: (2014)

Improper closure of primary containment access hatches.
Published: (1979)

Debris in containment and the residual heat removal system.
Published: (1994)

Isolation of reactor coolant system from low-pressure systems outside containment.
Published: (1984)

Deficiencies In outside containment flooding protection.
Published: (1987)

Steel containment degradation and associated license renewal aging management issues.
Published: (2011)

Advances in containment design and analysis : presented at ASME/ANS joint conference, Portland, Oregon, July 26-28, 1982 /
Published: (1982)

New information regarding insulation material performance and debris blockage of PWR containment sumps.
Published: (1990)

Containment integrated leak rate tests.
Published: (1985)

Inadvertent isolation of containment spray systems.
Published: (1984)

Risk-informed assessment of degraded containment vessels /
Published: (2006)

Design of the reactor containment systems in nuclear power plants : a safety guide.
Published: (1985)

Environmental qualification deficiency for cables and containment penetration pigtails.
Published: (1997)

Potential degradation of secondary containment.
Published: (1990)

Inservice inspection programs for prestressed concrete containment structures.
Published: (1980)

Installation of a hardened wetwell vent.
Published: (1989)

Uncontrolled leakage of reactor coolant outside containment.
Published: (1985)

Potential for Teflon® material degradation in containment penetrations, mechanical seals and other components.
Published: (2014)

Containment structures of U.S. nuclear power plants : background, regulations, codes and standards, and other considerations /
by: Ashar, Hansraj
Published: (2013)

Degraded coatings and corrosion of steel containment vessels.
Published: (1989)

Breach of containment integrity.
Published: (1979)

Potential loss of effective volume for containment recirculation spray at PWR facilities.
Published: (1990)

Failure of containment spray header valve to open due to excessive pressure from inertial effects of water.
Published: (1994)

Potential common-mode post-accident failure of containment coolers.
Published: (1996)

Technical basis for the containment protection and release reduction rulemaking for boiling water reactors with Mark I and Mark II containments /
by: Barr, Jonathan
Published: (2018)

Shield building concrete subsurface laminar cracking caused by moisture intrusion and freezing.
Published: (2013)

Degradation of prestressing tendon systems in prestressed concrete containments.
Published: (1999)