Cover Image

Containment purging and venting during normal operation.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, [1979]
Series:	Generic letter ; 79-54.
Subjects:	Nuclear reactors > Containment. Nuclear power plants > Piping > Valves.
Online Access:	https://purl.fdlp.gov/GPO/gpo153511

Similar Items

Containment purging and venting during normal operation--guidelines for valve operability.
Published: (1979)

Direction-dependent leak characteristics of containment purge valves.
Published: (1988)

Breach of containment integrity.
Published: (1979)

Primary containment isolation valve discrepancies.
Published: (1983)

Inadvertent containment spray due to personnel error.
Published: (1981)

Excessive nitrogen supply pressure actuates safety-relief valve operation to cause reactor depressurization.
Published: (1980)

Failure of swing check valve in the decay heat removal system at Davis-Besse Unit No. 1.
Published: (1980)

Susceptibility of containment sump recirculation gate valves to pressure locking.
Published: (1995)

Failures of scram discharge volume vent and drain valves.
Published: (1986)

Uncontrolled leakage of reactor coolant outside containment.
Published: (1985)

Degradation of containment isolation capability by a high-energy line break.
Published: (1989)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Failures to identify containment leakage due to inadequate local testing of BWR vacuum relief system valves.
Published: (1986)

Failure to close service water cross-connect isolation valves.
Published: (1989)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Reduction of reactor coolant inventory because of misalignment of RHR valves.
Published: (1986)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

Loss of shutdown cooling during disassembly of high pressure safety injection system check valve.
Published: (1991)

Failure of a boiling water reactor target rock main steam safety/relief valve.
Published: (2003)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

LWR primary coolant system pressure isolation valves.
Published: (1980)

RHR valve misalignment causes degradation of ECCS in PWRS.
Published: (1987)

Main steam isolation valve guide rail failure at Waterford Unit 3.
Published: (1988)

Unit startup with degraded high pressure safety injection system.
Published: (1986)

Undetected modification of flow characteristics in the high pressure safety Injection system.
Published: (1993)

Boiling water reactor safety/relief valve failures.
Published: (1983)

Valve stem corrosion failures.
Published: (1985)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Availability of NUREG-1169, "Technical findings related to Generic Issue C-8; boiling water reactor main steam isolation valve leakage and leakage treatment methods".
Published: (1986)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Inadequate inservice testing of main steam isolation valves.
Published: (1985)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)

Leaking shutdown cooling isolation valves at Cooper Nuclear Station.
Published: (1994)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Motor-operated valve inoperable due to stem-disc separation.
Published: (2012)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Main steam isolation valve closure logic.
Published: (1985)