Cracking In feedwater lines.

Significant unexpected erosion of feedwater lines.
Published: (1987)

Circumferential cracking of steam generator tubes.
Published: (1995)

Thermal fatigue cracking of feedwater piping to steam generators.
Published: (1993)

Supplemental information to Generic Letter 95-03 "Circumferential cracking of steam generator tubes".
Published: (1995)

Stress corrosion cracking in PWR steam generator tubes.
Published: (1990)

Failure of main feedwater check valves causes loss of feedwater system integrity and water-hammer damage.
Published: (1986)

Failure of main feedwater check valves causes loss of feedwater system integrity and water-hammer damage.
Published: (1986)

Failure of auxiliary feedwater manual isolation valve.
Published: (1986)

Steam generator feedwater distribution piping damage.
Published: (1991)

Axial (longitudinal) oriented cracking in piping.
Published: (1980)

Intergranular stress corrosion cracking leading to steam generator tube failure.
Published: (1984)

Single failures in auxiliary feedwater systems.
Published: (1987)

Thermal stratification in feedwater system piping.
Published: (1991)

Cracks in stiffening rings on 48-Inch-diameter UF6 cylinders.
Published: (1987)

Overspeed of the turbine-driven auxiliary feedwater pumps and overpressurization of the associated piping systems.
Published: (1990)

Fatigue crack flaw tolerance in nuclear power plant piping : a basis for improvements to ASME code section XI Appendix L /
Published: (2007)

Assessment of eddy current testing for the detection of cracks in cast stainless steel reactor piping components /
Published: (2007)

Potential for stress corrosion cracking in steam generator tube plugs supplied by Babcock and Wilcox.
Published: (1989)

Resolution of Generic Safety Issue 188 : steam generator tube leaks or ruptures concurrent with containment bypass from main steam line or feedwater line breaches /
by: Reichelt, E.
Published: (2009)

Cavitation erosion of letdown line orifices resulting in fatigue cracking of pipe welds.
Published: (1998)

Availability of NUREG-1169, "Technical findings related to Generic Issue C-8; boiling water reactor main steam isolation valve leakage and leakage treatment methods".
Published: (1986)

Service experience in operating plants, 1991 : presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991 /
Published: (1991)

Loss of feedwater isokinetic sampling probes at Dresden units 2 and 3.
Published: (2004)

IGSCC in BWR plants.
Published: (1984)

Cracking of the upper shell-to-transition cone girth welds in steam generators.
Published: (1990)

Disablement of turbine-driven auxiliary feedwater pump due to closure of one of the parallel steam supply valves.
Published: (1989)

Stress corrosion cracking in nonsensitized 316 stainless steel.
Published: (1984)

Brittle-like cracking in plastic pipe for gas service.
Published: (1998)

Degradation of containment isolation capability by a high-energy line break.
Published: (1989)

Pipe cracks in stagnant borated water systems at PWR plants.
Published: (1979)

Valve stem corrosion failures.
Published: (1985)

Cracking indications in thermally treated alloy 600 steam generator tubes.
Published: (2008)

Crack in weld area of reactor coolant system hot leg piping at V.C. Summer.
Published: (2000)

Cracking in charging pump casing cladding.
Published: (1980)

Crack-like indications at dents/dings and in the freespan region of thermally treated alloy 600 steam generator tubes.
Published: (2013)

Contaminants and stagnant conditions affecting stress corrosion cracking in stainless steel piping in pressurized water reactors.
Published: (2011)