Pipe crack study group--enclosing NUREG-0531 & notice.

Circumferential cracking of steam generator tubes.
Published: (1995)

Assessment of eddy current testing for the detection of cracks in cast stainless steel reactor piping components /
Published: (2007)

Availability of NUREG-1169, "Technical findings related to Generic Issue C-8; boiling water reactor main steam isolation valve leakage and leakage treatment methods".
Published: (1986)

Fatigue crack flaw tolerance in nuclear power plant piping : a basis for improvements to ASME code section XI Appendix L /
Published: (2007)

Cracks in stiffening rings on 48-Inch-diameter UF6 cylinders.
Published: (1987)

Cracking In feedwater system piping.
Published: (1991)

Cavitation erosion of letdown line orifices resulting in fatigue cracking of pipe welds.
Published: (1998)

Crack in weld area of reactor coolant system hot leg piping at V.C. Summer.
Published: (2000)

Brittle-like cracking in plastic pipe for gas service.
Published: (1998)

Stress corrosion cracking in PWR steam generator tubes.
Published: (1990)

Intergranular stress corrosion cracking leading to steam generator tube failure.
Published: (1984)

Cracking of the upper shell-to-transition cone girth welds in steam generators.
Published: (1990)

Assessment of critical subcooled flow through cracks in large and small pipes using TRACE and RELAP5 /
by: Oussoren, Andrew, et al.
Published: (2017)

Resolution of Generic Safety Issue 188 : steam generator tube leaks or ruptures concurrent with containment bypass from main steam line or feedwater line breaches /
by: Reichelt, E.
Published: (2009)

Cracking In feedwater lines.
Published: (1979)

Stress corrosion cracking in nonsensitized 316 stainless steel.
Published: (1984)

Potential for stress corrosion cracking in steam generator tube plugs supplied by Babcock and Wilcox.
Published: (1989)

Service experience in fossil and nuclear power plants : presented at the 1999 ASME Pressure Vessels and Piping Conference : Boston, Massachusetts, August 1-5, 1999 /
Published: (1999)

Degradation of containment isolation capability by a high-energy line break.
Published: (1989)

Valve stem corrosion failures.
Published: (1985)

Pipe cracks in stagnant borated water systems at PWR plants.
Published: (1979)

Assessment of crack detection in heavy-walled cast stainless steel piping welds using advanced low-frequency ultrasonic methods /
Published: (2007)

Rupture of extraction steam line on high pressure turbine.
Published: (1989)

Generic activity A-10 BWR cracks.
Published: (1980)

IGSCC in BWR plants.
Published: (1984)

Non-destructive and failure evaluation of tubing from a retired steam generator /
Published: (2007)

Crack-like indications at dents/dings and in the freespan region of thermally treated alloy 600 steam generator tubes.
Published: (2013)

Environmental effects on fatigue crack initiation in piping and pressure vessel steels /
by: Chopra, O. K.
Published: (2001)

Cracking indications in thermally treated alloy 600 steam generator tubes.
Published: (2008)

Uncontrolled leakage of reactor coolant outside containment.
Published: (1985)

IEB 80-08 examination of containment liner penetration welds.
Published: (1980)

Contaminants and stagnant conditions affecting stress corrosion cracking in stainless steel piping in pressurized water reactors.
Published: (2011)

NRC position on IGSCC in BWR austenitic stainless steel piping.
Published: (1988)

In-tube steam condensation in the presence of air /
by: Tanrikut, A., et al.
Published: (2000)

Results of open testing for the program to assess the reliability of emerging nondestructive techniques /
by: Meyer, R. M., et al.
Published: (2017)

Weakness in emergency operating procedures found as result of steam generator tube rupture.
Published: (1993)