Maintenance deficiency associated with General Electric horizontal custom 8000 induction motors.
| Format: | Government Document eBook |
|---|---|
| Language: | English |
| Published: |
Washington, D.C. :
United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation,
1991.
|
| Series: | Information notice ;
no. 91-07. |
| Subjects: | |
| Online Access: | https://purl.fdlp.gov/GPO/gpo152079 |
Similar Items
Potential design deficiency in motor-operated valve control circuitry.
Published: (2013)
Published: (2013)
Defective motor shaft keys in Limitorque motor actuators.
Published: (1988)
Published: (1988)
Potential deficiency of electrical cables with bonded hypalon jackets.
Published: (1992)
Published: (1992)
Deficiencies in ferro-resonant transformers.
Published: (1984)
Published: (1984)
Inoperability of General Electric Magne-Blast breaker because of misalignment of close-latch spring.
Published: (1994)
Published: (1994)
Plant trip and loss of preferred AC power from inadequate switchyard maintenance.
Published: (2005)
Published: (2005)
Sheared pinion gear-to-shaft keys in Limitorque motor actuators.
Published: (1990)
Published: (1990)
Electrical wire insulation degradation caused failure in a safety-related motor control center.
Published: (1991)
Published: (1991)
Licensee report of defective refurbished circuit breakers.
Published: (1988)
Published: (1988)
Substandard, refurbished Potter & Brumfield relays represented as new.
Published: (1990)
Published: (1990)
Deficiencies identified during electrical distribution system functional inspections.
Published: (1991)
Published: (1991)
Failure of motor-operated valve electric power train due to sheared or dislodged motor pinion gear key.
Published: (1994)
Published: (1994)
Degraded DC system at Palisades.
Published: (1981)
Published: (1981)
Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)
Published: (1990)
Incorrect configuration of breaker operating springs in General Electric AK-Series metal-clad circuit breakers.
Published: (1991)
Published: (1991)
Potential deficiency of certain class 1E instrumentation and control cables.
Published: (1993)
Published: (1993)
Operating experience regarding electrical circuit breakers.
Published: (2007)
Published: (2007)
Inadequate maintenance of uninterruptible power supplies and inverters.
Published: (1994)
Published: (1994)
Mechanical failure of indicating-type fuses.
Published: (1987)
Published: (1987)
Insulation breakdown of silicone rubber-insulated single conductor cables during high potential testing.
Published: (1987)
Published: (1987)
Failure of ITE model K-600 circuit breaker.
Published: (1981)
Published: (1981)
Failures of the undervoltage, trip function of reactor trip system breakers.
Published: (1983)
Published: (1983)
Potential problems in generators manufactured by Electrical Products Incorporated.
Published: (1986)
Published: (1986)
Electrical bus bar failures.
Published: (1989)
Published: (1989)
Control of maintenance and essential equipment.
Published: (1979)
Published: (1979)
Electrical penetration assembly degradation.
Published: (1993)
Published: (1993)
Potential problems in identifying causes of emergency diesel generator malfunctions.
Published: (1991)
Published: (1991)
Station battery problems.
Published: (1985)
Published: (1985)
Periodic testing and preventive maintenance of molded case circuit breakers.
Published: (1993)
Published: (1993)
Component failures caused by elevated DC control voltage.
Published: (1983)
Published: (1983)
Metalclad, low-voltage power circuit breakers refurbished with substandard parts.
Published: (1989)
Published: (1989)
Reactor trip breaker malfunctions (undervoltage trip devices on GE Type AK-2-25 breakers).
Published: (1983)
Published: (1983)
Malfunctions of ITT Barton model 580 series switches during requalification testing.
Published: (1986)
Published: (1986)
Failures of Class 1E safety-related switchgear circuit breakers to close on demand.
Published: (1983)
Published: (1983)
Failures of General Electric Magne-Blast circuit breakers.
Published: (1996)
Published: (1996)
Deficient electrical terminations identified in safety-related components.
Published: (1988)
Published: (1988)
Failures of General Electric type HFA relays.
Published: (1982)
Published: (1982)
Electrical component failure due to degradation of polyvinyl chloride wire insulation.
Published: (1994)
Published: (1994)
Failures of General Electric magne-blast circuit breakers to latch closed.
Published: (1994)
Published: (1994)
Potential deficiency of certain AGASTAT E-7000 series time-delay relays.
Published: (1982)
Published: (1982)