Cover Image

Corrosion of valve-to-torque tube keys in spray pond cross connect valves.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, 1990.
Series:	Information notice ; no. 90-73.
Subjects:	Nuclear power plants > Piping > Valves > Corrosion. Cooling ponds.
Online Access:	https://purl.fdlp.gov/GPO/gpo151960

Similar Items

Valve stem corrosion failures.
Published: (1985)

Failure to close service water cross-connect isolation valves.
Published: (1989)

Corrosion of William Powell gate valve disc holders.
Published: (1994)

Valve body erosion.
Published: (1989)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Reduction of reactor coolant inventory because of misalignment of RHR valves.
Published: (1986)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

Accelerated dealloying of cast aluminum-bronze valves caused by microbiologically induced corrosion.
Published: (1994)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

LWR primary coolant system pressure isolation valves.
Published: (1980)

RHR valve misalignment causes degradation of ECCS in PWRS.
Published: (1987)

Check valve problems.
Published: (1982)

Effects of insulation debris on throttle-valve flow performance : a subtask of GSI-191 /
Published: (2006)

Velan swing check valves.
Published: (1981)

Check valve failures.
Published: (1981)

Potentially substandard valve replacement parts.
Published: (1988)

Potential clogging of high pressure safety injection throttle valves during recirculation.
Published: (1996)

Motor-operated valve torque switches set below the manufacturer's recommended value.
Published: (1984)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Failure of air check valves to seat.
Published: (1985)

Leaking shutdown cooling isolation valves at Cooper Nuclear Station.
Published: (1994)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Malfunction of a pressurized code safety valve.
Published: (1993)

Failures of nut-locking devices in check-valves.
Published: (1993)

Motor-operated valve actuator thrust variations measured with a torque thrust cell and a strain gage.
Published: (1993)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Failures of main steam isolation valves.
Published: (1988)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

Failures of Rockwell International globe valves.
Published: (1984)

Valve-stem failure caused by embrittlement.
Published: (1992)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Failure of main steam isolation valves as a result of sticking solenoid pilot valves.
Published: (1995)

Loss of shutdown cooling during disassembly of high pressure safety injection system check valve.
Published: (1991)

Changes In pressurizer safety valve setpoints before installation.
Published: (1991)

Misapplication of valves by throttling beyond design range.
Published: (1983)