Cover Image

Failure of check and stop check valves subjected to low flow conditions.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, DC : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1986.
Series:	NRC information notice ; 86-09.
Subjects:	Nuclear power plants > Piping > Valves.
Online Access:	https://purl.fdlp.gov/GPO/gpo147912

Similar Items

Check valve failures.
Published: (1981)

Failure of air check valves to seat.
Published: (1985)

Failures of nut-locking devices in check-valves.
Published: (1993)

Check valve problems.
Published: (1982)

Velan swing check valves.
Published: (1981)

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

Failures of main steam isolation check valves resulting in disc separation.
Published: (1990)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

Malfunction of Borg-Warner bolted bonnet check valves caused by failure of the swing arm.
Published: (1990)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

Common mode failure of main steam isolation nonreturn check valves.
Published: (1983)

AnchorDarling double disc gate valve check pin and stem-disc separation failures.
Published: (2017)

Check valve inservice testing program deficiencies.
Published: (1988)

Problems with incorrectedly-installed swing-check valves.
Published: (2001)

Check valve failures on diesel generator engine cooling system.
Published: (1982)

Valve stem corrosion failures.
Published: (1985)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Failures of main steam isolation valves.
Published: (1988)

Failures of Rockwell International globe valves.
Published: (1984)

Valve-stem failure caused by embrittlement.
Published: (1992)

Detached check valve disc not detected by use of acoustic and magnetic nonintrusive test techniques.
Published: (2000)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Failure of main feedwater check valves causes loss of feedwater system integrity and water-hammer damage.
Published: (1986)

Failure of main feedwater check valves causes loss of feedwater system integrity and water-hammer damage.
Published: (1986)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Vibration-induced degradation and failure of safety-related valves.
Published: (2006)

Shaft seal packing causes binding in main steam swing disc check and isolation valves.
Published: (1980)

Failure of swing check valve in the decay heat removal system at Davis-Besse Unit No. 1.
Published: (1980)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Failure of Rockwell-Edward main steam isolation valves.
Published: (1981)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Vibration-induced valve failures.
Published: (1983)

Failure of main steam isolation valves as a result of sticking solenoid pilot valves.
Published: (1995)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Potentially substandard valve replacement parts.
Published: (1988)

Failure of soft seat valve seals.
Published: (1984)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Standby liquid control system squib valves failure to fire.
Published: (1986)