Cover Image

Potential deficiencies in environmental qualification of Limitorque motor valve operator wiring.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1986.
Series:	Information notice ; 86-03.
Subjects:	Nuclear power plants > Piping > Valves. Electric wiring > Defects.
Online Access:	https://purl.fdlp.gov/GPO/gpo147904

Similar Items

Recent Identified problems with Limitorque motor operators.
Published: (1986)

Potential deficiency in improperly rated field wiring to solenoid valves.
Published: (1984)

Potential design deficiency in motor-operated valve control circuitry.
Published: (2013)

Potential deficiency in motor-operated valve control circuits and annunciation.
Published: (1984)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Repetitive failures of Limitorque operator SMB-4 motor-to-shaft key.
Published: (1981)

Check valve failures.
Published: (1981)

Failure of motor-operated valve electric power train due to sheared or dislodged motor pinion gear key.
Published: (1994)

Failures of nut-locking devices in check-valves.
Published: (1993)

Failures of Rockwell International globe valves.
Published: (1984)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Thrust limits for Limitorque actuators and potential overstressing of motor-operated valves.
Published: (1992)

Malfunction of Borg-Warner bolted bonnet check valves caused by failure of the swing arm.
Published: (1990)

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

Limitorque valve geared limit switch lubricant.
Published: (1979)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Failure of Limitorque motor-operated valves resulting from incorrect installation of pinion gear.
Published: (1985)

Failure of soft seat valve seals.
Published: (1984)

Common mode failure of main steam isolation nonreturn check valves.
Published: (1983)

Main steam isolation valve (MSIV) leakage.
Published: (1982)

Failure of safety injection valves to operate against differential pressure.
Published: (1981)

Inadequacies in the design of DC motor-operated valves.
Published: (1988)

Boiling water reactor safety/relief valve failures.
Published: (1983)

Failure of yokes installed on Walworth gate and globe valves.
Published: (1993)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

Check valve failures on diesel generator engine cooling system.
Published: (1982)

Main steam safety valve failures caused by failed cotter pins.
Published: (1984)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Systems interaction event resulting in reactor system safety relief valve opening following a fire-protection deluge system malfunction.
Published: (1985)

Deficient operator actions following dual function valve failures.
Published: (1986)

Vibration-induced valve failures.
Published: (1983)

Eyebolts with indeterminate properties installed in Limitorque valve operator housing covers.
Published: (1993)

Failure of safety/relief valve discharge line vacuum breakers.
Published: (1983)

Deficiency in design modification to address faliures of Hiller actuators upon a gradual loss of air pressure.
Published: (1992)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Potentially undersized valve actuators.
Published: (1988)

Potentially substandard valve replacement parts.
Published: (1988)