Cover Image

Valve stem corrosion failures.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1985.
Series:	Information notice ; 85-59.
Subjects:	Nuclear power plants > Piping > Valves > Corrosion. Nuclear power plants > Piping > Valves > Cracking.
Online Access:	https://purl.fdlp.gov/GPO/gpo147207

Similar Items

Corrosion of William Powell gate valve disc holders.
Published: (1994)

Valve body erosion.
Published: (1989)

Valve-stem failure caused by embrittlement.
Published: (1992)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Corrosion of valve-to-torque tube keys in spray pond cross connect valves.
Published: (1990)

AnchorDarling double disc gate valve check pin and stem-disc separation failures.
Published: (2017)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Failure of air check valves to seat.
Published: (1985)

Motor-operated valve inoperable due to stem-disc separation.
Published: (2012)

Consideration of the stem rejection load in calculation of required valve thrust.
Published: (1992)

Check valve failures.
Published: (1981)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Failures of nut-locking devices in check-valves.
Published: (1993)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Failure of check and stop check valves subjected to low flow conditions.
Published: (1986)

Availability of NUREG-1169, "Technical findings related to Generic Issue C-8; boiling water reactor main steam isolation valve leakage and leakage treatment methods".
Published: (1986)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Vibration-induced degradation and failure of safety-related valves.
Published: (2006)

Failures of Rockwell International globe valves.
Published: (1984)

Failures of main steam isolation valves.
Published: (1988)

Accelerated dealloying of cast aluminum-bronze valves caused by microbiologically induced corrosion.
Published: (1994)

Potentially substandard valve replacement parts.
Published: (1988)

Check valve problems.
Published: (1982)

Malfunction of Borg-Warner bolted bonnet check valves caused by failure of the swing arm.
Published: (1990)

Failure of Rockwell-Edward main steam isolation valves.
Published: (1981)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Velan swing check valves.
Published: (1981)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Failures of main steam isolation check valves resulting in disc separation.
Published: (1990)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Periodic verification of leak tight integrity of pressure isolation valves.
Published: (1987)

Malfunction of a pressurized code safety valve.
Published: (1993)