Vacuum relief system for boiling water reactor Mark I and Mark II containments.

Failure of a boiling water reactor target rock main steam safety/relief valve.
Published: (2003)

Cracking in boiling-water-reactor Mark I and Mark II containments caused by failure of the inerting system.
Published: (1985)

Excessive nitrogen supply pressure actuates safety-relief valve operation to cause reactor depressurization.
Published: (1980)

Potential overpressurization of main steam system.
Published: (1994)

Modifications to boiling water reactor control rod drive systems.
Published: (1980)

Operational issues identified in boiling water reactor trip and transient.
Published: (2000)

Boiling water reactors /
Published: (2023)

Boiling water reactors.
by: Kramer, Andrew W. (Andrew William), 1893-
Published: (1958)

Resolution of generic issue 101 "Boiling water reactor water level redundancy".
Published: (1989)

IEB 80-17 supplement 1 failure of control rods to insert during a scram at a BWR.
Published: (1980)

Torus shells with corrosion and degraded coatings in BWR containments.
Published: (1988)

Suppression pool temperature limits for BWR containments : generic technical activity A-39 /
by: Su, T. M.
Published: (1981)

Modification of vacuum breakers on Mark I containments.
Published: (1983)

Core shroud cracking at beltline region welds in boiling-water reactors.
Published: (1993)

General description of a boiling water reactor.
Published: (1973)

Mark I containment long-term program.
Published: (1980)

An experimental and modelling study of natural-circulation boiling water reactor dynamics /
by: Zboray, Robert
Published: (2002)

Availability of NUREG-1169, "Technical findings related to Generic Issue C-8; boiling water reactor main steam isolation valve leakage and leakage treatment methods".
Published: (1986)

Inadvertent reduction in primary coolant inventory in boiling water reactors during shutdown and startup.
Published: (1984)

Investigation of distorted-geometry simulation of pool dynamics in horizontal-vent BWR containments /
by: Ruggieri, N. G., et al.
Published: (1980)

Failure of safety/relief valves to open at BWR--final report.
Published: (1983)

Acceptance criteria for the Mark I containment long term program.
Published: (1979)

Breach of containment integrity.
Published: (1979)

The thermal-hydraulics of a boiling water nuclear reactor /
by: Lahey, Richard T.
Published: (1993)

Schedule for implementation and resolution of Mark I containment long term program.
Published: (1979)

Primary containment isolation valve discrepancies.
Published: (1983)

Containment purging and venting during normal operation.
Published: (1979)

Inadvertent containment spray due to personnel error.
Published: (1981)

Transmittal of NUREG-0763, "Guidelines for confirmatory in-plant tests of safety-relief valve discharges for BWR plants," and NUREG-0783, "Suppression pool temperature limits for BWR containments".
Published: (1982)

Direction-dependent leak characteristics of containment purge valves.
Published: (1988)

Degraded ability to isolate the reactor coolant system from low-pressure coolant systems in BWRS.
Published: (1986)

Containment purging and venting during normal operation--guidelines for valve operability.
Published: (1979)

Accident analysis for nuclear power plants with graphite moderated boiling water RBMK reactors.
Published: (2005)

Previously unidentified release path from boiling water reactor control rod hydraulic units.
Published: (1990)

Reliability of ultrasonic in-service inspection of welds in reactor internal of boiling water reactors /
by: Schuster, G. J.
Published: (2013)

Investigation on stability of a boiling heavy water reactor /
by: Nishihara, Hiroshi
Published: (1962)