Cover Image

Inadequate surveillance and postmaintenance and postmodification system testing.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, 1985.
Series:	NRC information notice ; 85-23.
Subjects:	Nuclear power plants > Piping > Valves > Testing.
Online Access:	https://purl.fdlp.gov/GPO/gpo146862

Similar Items

Inadequate testing to detect failures of safety-related pneumatic components or systems.
Published: (1986)

Inadequate local leak rate testing.
Published: (1992)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

Safety-related (1) motor-operated valve testing and surveillance results of the public workshops.
Published: (1989)

Inadequate inservice testing of main steam isolation valves.
Published: (1985)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Potential for surveillance testing to fail to detect an inoperable main steam isolation valve.
Published: (1994)

Setpoint testing of pressurizer safety valves with filled loop seals using hydraulic assist devices.
Published: (1988)

Failures to identify containment leakage due to inadequate local testing of BWR vacuum relief system valves.
Published: (1986)

Check valve inservice testing program deficiencies.
Published: (1988)

Preliminary results of validation testing of motor-operated valve diagnostic equipment.
Published: (1991)

Improperly installed instrumentation, inadequate quality control and inadequate postmodification testing.
Published: (1985)

inadequate main steam safety valve (MSSV) setpoints and performance issues associated with long MSSV inlet piping.
Published: (1997)

Guidelines for inservice testing at nuclear power plants : inservice testing of pumps and valves and inservice examination and testing of dynamic restraints (snubbers) at nuclear power plants, final report /
by: Bedi, Gurjendra S.
Published: (2013)

Testing of parallel disc gate valves in Europe.
Published: (1990)

Results of validation testing of motor-operated valve diagnosis equipment.
Published: (1992)

Inoperability of power-operated relief valves masked by downstream indications during testing.
Published: (1996)

Malfunction of a pressurized code safety valve.
Published: (1993)

Detached check valve disc not detected by use of acoustic and magnetic nonintrusive test techniques.
Published: (2000)

NRC inspections of programs being developed at nuclear power plants in response to Generic Letter 89-10.
Published: (1992)

Accuracy of motor-operated valve diagnostic equipment (responses to supplement 5 to Generic Letter 89-10).
Published: (1994)

Recent NRC-sponsored testing of motor-operated valves.
Published: (1989)

Results of NRC-sponsored testing of motor-operated valves.
Published: (1990)

Main steam safety valve test failures and ringed setting adjustments.
Published: (1986)

Valve stem corrosion failures.
Published: (1985)

Cladding behavior during postulated loss-of-coolant accidents /
by: Billone, M. C.
Published: (2016)

Testing and operations-induced degradation of 3-stage Target Rock safety/relief valves.
Published: (2018)

Motor-operated valve actuator thrust variations measured with a torque thrust cell and a strain gage.
Published: (1993)

Valves for power plant development and testing : international conference, 4-6 April 1989, University of Southampton /
Published: (1989)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Target rock two-stage SRV setpoint drift update.
Published: (1988)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

Potentially substandard valve replacement parts.
Published: (1988)

Results of the NRC-sponsored qualification methodology research test on ASCO solenoid valves.
Published: (1984)

Accuracy of motor-operated valve diagnostic equipment manufactured by Liberty Technologies.
Published: (1993)

Guidelines for inservice testing at nuclear power plants : inservice testing of pumps and valves and inservice examination and testing of dynamic restraints (snubbers) at nuclear power plants : draft report for comment /
by: Bedi, Gurjendra S.
Published: (2011)

Plant outage events involving poor coordination between operations and maintenance personnel during valve testing and manipulations.
Published: (1991)