Cover Image

Alleged falsification of certifications and alteration of markings on piping, valves, and fittings.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, 1985.
Series:	NRC information notice ; 85-19.
Subjects:	Nuclear power plants > Piping. Nuclear power plants > Piping > Valves. False certification.
Online Access:	https://purl.fdlp.gov/GPO/gpo146858

Similar Items

Valve stem corrosion failures.
Published: (1985)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Potentially substandard valve replacement parts.
Published: (1988)

Check valve problems.
Published: (1982)

inadequate main steam safety valve (MSSV) setpoints and performance issues associated with long MSSV inlet piping.
Published: (1997)

Failure of air check valves to seat.
Published: (1985)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Motor-operated valve inoperable due to stem-disc separation.
Published: (2012)

Periodic verification of leak tight integrity of pressure isolation valves.
Published: (1987)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Consideration of the stem rejection load in calculation of required valve thrust.
Published: (1992)

Valve body erosion.
Published: (1989)

Check valve failures.
Published: (1981)

Failure of check and stop check valves subjected to low flow conditions.
Published: (1986)

IEB 80-21 valve yokes supplied by Malcolm Foundry Company, Inc.
Published: (1980)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Testing and operations-induced degradation of 3-stage Target Rock safety/relief valves.
Published: (2018)

Vibration-induced degradation and failure of safety-related valves.
Published: (2006)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

AnchorDarling double disc gate valve check pin and stem-disc separation failures.
Published: (2017)

Failures of Rockwell International globe valves.
Published: (1984)

Valve-stem failure caused by embrittlement.
Published: (1992)

Slow five percent scram insertion times caused by viton diaphragms in scram solenoid pilot valves.
Published: (1996)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Velan swing check valves.
Published: (1981)

Multiple-subsequent actuation of safety/relief valves following an isolation event.
Published: (1978)

Misapplication of valves by throttling beyond design range.
Published: (1983)

Check valve inservice testing program deficiencies.
Published: (1988)

Problems with incorrectedly-installed swing-check valves.
Published: (2001)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Corrosion of William Powell gate valve disc holders.
Published: (1994)

Failure of Rockwell-Edward main steam isolation valves.
Published: (1981)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Inadequacies in the design of DC motor-operated valves.
Published: (1988)

Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)