Cover Image

Pipe whip restraints.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1985.
Series:	NRC information notice ; 85-05.
Subjects:	Nuclear power plants > Piping > Safety measures. Nuclear power plants > Piping > Accidents.
Online Access:	https://purl.fdlp.gov/GPO/gpo146843

Similar Items

Chloride contamination of safety related piping and components.
Published: (1980)

Use of inappropriate guidelines and criteria for nuclear piping and pipe support evaluation and design.
Published: (1995)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Fatigue crack flaw tolerance in nuclear power plant piping : a basis for improvements to ASME code section XI Appendix L /
Published: (2007)

Alleged falsification of certifications and alteration of markings on piping, valves, and fittings.
Published: (1985)

Failure of condensate piping because of erosion-corrosion at a flow-straightening device.
Published: (1995)

Stress analysis of safety-related piping.
Published: (1979)

Failures of air-operated valves affecting safety-related systems.
Published: (1988)

Standby liquid control system squib valves failure to fire.
Published: (1986)

Target Rock two-stage SRV setpoint drift.
Published: (1986)

Pipe support anchors installed improperly.
Published: (2010)

Relaxation in arbitrary intermediate pipe rupture requirements.
Published: (1987)

Erosion-corrosion of PWR feedwater piping survey of experience, design, water chemistry, and materials /
by: Jonas, Otakar
Published: (1988)

Unexpected restriction to thermal growth of reactor coolant piping.
Published: (1992)

Piping restraint effects on piping integrity : presented at Third U.S. [as printed] National Congress on Pressure Vessels and Piping, American Society of Mechanical Engineers, San Francisco, California, June 25-29, 1979 /
Published: (1979)

Multiple-subsequent actuation of safety/relief valves following an isolation event.
Published: (1978)

Failure of safety injection valves to operate against differential pressure.
Published: (1981)

Safety injection pipe failure.
Published: (1988)

Axial (longitudinal) oriented cracking in piping.
Published: (1980)

Potential blockage by debris of safety system piping which is not used during normal operation or tested during surveillances.
Published: (1996)

Results of validation testing of motor-operated valve diagnosis equipment.
Published: (1992)

Improper use of soluble weld purge dam material.
Published: (1993)

Weakness in emergency operating procedures found as result of steam generator tube rupture.
Published: (1993)

Potential problem with water-soluble purge dam materials used during inert gas welding.
Published: (1981)

High-energy piping failures caused by wall thinning.
Published: (1991)

Summary of responses to NRC Bulletin 87-01, "Thinning of pipe walls in nuclear power plants".
Published: (1988)

Analysis of JNES seismic tests on degraded piping /
Published: (2010)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Rupture in extraction steam piping as a result of flow-accelerated corrosion.
Published: (1997)

Probability of pipe fracture in the primary coolant loop of a PWR plant /
Published: (1981)

Corrosion in fire protection piping due to air and water interaction.
Published: (2013)

Themally induced pressurization of nuclear power facility piping.
Published: (1996)

Assessment of eddy current testing for the detection of cracks in cast stainless steel reactor piping components /
Published: (2007)

Use of specialized "stiff" pipe clamps.
Published: (1983)

Seismic analysis of large-scale piping systems for the JNES-NUPEC ultimate strength piping test program /
by: DeGrassi, G.
Published: (2008)

inadequate main steam safety valve (MSSV) setpoints and performance issues associated with long MSSV inlet piping.
Published: (1997)

Periodic verification of design-basis capability of safety-related motor-operated valves.
Published: (1996)

Defective RHR replacement piping.
Published: (1984)

Piping thermal deflection induced by stratified flow.
Published: (1984)

Unexpected piping movement attributed to thermal stratification.
Published: (1988)