Cover Image

Main steam line break effect on environmental qualification of equipment.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1984.
Series:	NRC information notice ; 84-90.
Subjects:	Nuclear power plants > Piping > Defects. Nuclear power plants > Equipment > Testing.
Online Access:	https://purl.fdlp.gov/GPO/gpo146725

Similar Items

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Main steam isolation valve (MSIV) leakage.
Published: (1982)

Potential design deficiency in motor-operated valve control circuitry.
Published: (2013)

Potential deficiencies in environmental qualification of Limitorque motor valve operator wiring.
Published: (1986)

Main steam safety valve failures caused by failed cotter pins.
Published: (1984)

Vibration-induced valve failures.
Published: (1983)

Failures in turbine exhaust lines.
Published: (1982)

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

Failure of motor-operated valve electric power train due to sheared or dislodged motor pinion gear key.
Published: (1994)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Safety injection pipe failure.
Published: (1988)

Tube leakage due to a fabrication flaw in a replacement steam generator.
Published: (2004)

Main steam isolation valve closure logic.
Published: (1985)

Common mode failure of main steam isolation nonreturn check valves.
Published: (1983)

Failures of Rockwell International globe valves.
Published: (1984)

Check valve failures.
Published: (1981)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Weakness in emergency operating procedures found as result of steam generator tube rupture.
Published: (1993)

Failure of safety injection valves to operate against differential pressure.
Published: (1981)

Environmental qualification testing experience.
Published: (1983)

Environmental qualification of safety-related equipment.
Published: (1980)

Results of open testing for the program to assess the reliability of emerging nondestructive techniques /
by: Meyer, R. M., et al.
Published: (2017)

Recent NRC-sponsored testing of motor-operated valves.
Published: (1989)

Results of NRC-sponsored testing of motor-operated valves.
Published: (1990)

Defective RHR replacement piping.
Published: (1984)

Equipment qualification testing experience.
Published: (1981)

Potential failure of Westinghouse steam generator tube mechanical plugs.
Published: (1989)

Feedwater line break.
Published: (1986)

Equipment environmental qualification testing experience - updating of test summaries previously published in 81-29.
Published: (1982)

Environmental qualification of safety-related electrical equipment.
Published: (1982)

Possible flaws in certain piping systems fabricated by Associated Piping and Engineering.
Published: (1991)

Failures of Hiller actuators upon gradual loss of air pressure.
Published: (1982)

Deficiency in design modification to address faliures of Hiller actuators upon a gradual loss of air pressure.
Published: (1992)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

Orders on environmental qualification of safety related electrical equipment.
Published: (1980)

Deficiencies in equipment qualification testing and certification process.
Published: (1985)

Failure of condensate piping because of erosion-corrosion at a flow-straightening device.
Published: (1995)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

Potential failures of auxiliary steam piping and the possible effects on the operability of vital equipment.
Published: (1990)

Final report on advanced nondestructive evaluation for steam generator tubing for the Second International Steam Generator Tube Integrity Program /
Published: (2003)