Piping thermal deflection induced by stratified flow.

Failure of condensate piping because of erosion-corrosion at a flow-straightening device.
Published: (1995)

Unexpected piping movement attributed to thermal stratification.
Published: (1988)

Pipe whip restraints.
Published: (1985)

Use of inappropriate guidelines and criteria for nuclear piping and pipe support evaluation and design.
Published: (1995)

Computer code defect in stress analysis of piping elbow.
Published: (1979)

Rupture in extraction steam piping as a result of flow-accelerated corrosion.
Published: (1997)

Thermal stratification in feedwater system piping.
Published: (1991)

In-tube steam condensation in the presence of air under transient conditions /
by: Tanrikut, A.
Published: (2007)

Alleged falsification of certifications and alteration of markings on piping, valves, and fittings.
Published: (1985)

Fatigue crack flaw tolerance in nuclear power plant piping : a basis for improvements to ASME code section XI Appendix L /
Published: (2007)

Pipe support anchors installed improperly.
Published: (2010)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

Relaxation in arbitrary intermediate pipe rupture requirements.
Published: (1987)

Potential for stress corrosion cracking in steam generator tube plugs supplied by Babcock and Wilcox.
Published: (1989)

Safety injection pipe failure.
Published: (1988)

Axial (longitudinal) oriented cracking in piping.
Published: (1980)

Erosion-corrosion of PWR feedwater piping survey of experience, design, water chemistry, and materials /
by: Jonas, Otakar
Published: (1988)

Potential for water hammer, thermal stratification, and steam binding in high-pressure coolant Injection piping.
Published: (1989)

Flow-induced vibration handbook for nuclear and process equipment /
Published: (2022)

High-energy piping failures caused by wall thinning.
Published: (1991)

Analysis of JNES seismic tests on degraded piping /
Published: (2010)

Chloride contamination of safety related piping and components.
Published: (1980)

Defective RHR replacement piping.
Published: (1984)

Use of specialized "stiff" pipe clamps.
Published: (1983)

Seismic analysis of large-scale piping systems for the JNES-NUPEC ultimate strength piping test program /
by: DeGrassi, G.
Published: (2008)

Potential blockage by debris of safety system piping which is not used during normal operation or tested during surveillances.
Published: (1996)

Possible flaws in certain piping systems fabricated by Associated Piping and Engineering.
Published: (1991)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Vibration-induced degradation and failure of safety-related valves.
Published: (2006)

Vibration-induced valve failures.
Published: (1983)

Problems with the reliable detection of intergranular attack (IGA) of steam generator tubing.
Published: (1991)

Corrosion in fire protection piping due to air and water interaction.
Published: (2013)

Mechanical integrity of in-situ leach injection wells and piping.
Published: (1997)

Overloading of structural elements due to pipe support loads.
Published: (1979)

Stress corrosion cracking in nonsensitized 316 stainless steel.
Published: (1984)

Technical basis for revision of the Pressurized Thermal Shock (PTS) screening limit in the PTS rule (10 CFR 50.61) /
Published: (2007)