Cover Image

BWR high-pressure coolant injection (HPCI) initiation seal-in and indication.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : U.S. Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1984.
Series:	NRC information notice ; 84-64.
Subjects:	Boiling water reactors. Nuclear reactors > Cooling.
Online Access:	https://purl.fdlp.gov/GPO/gpo146511

Similar Items

Implementation of NUREG-0313, technical report on material selection & processing GL for BWR coolant press boundary piping.
Published: (1981)

The "calculated" loss-of-coolant accident : a review /
by: Ybarrondo, L. J.
Published: (1972)

Thermal stratification of water in BWR reactor vessels.
Published: (1993)

HPCI/RCIC high steam flow setpoints.
Published: (1982)

Resolution of generic issue 101 "Boiling water reactor water level redundancy".
Published: (1989)

Loss of high head safety injection emergency boration and reactor coolant makeup capability.
Published: (1982)

An experimental and modelling study of natural-circulation boiling water reactor dynamics /
by: Zboray, Robert
Published: (2002)

Issuance of NUREG-0313, rev 1, "Technical report on material selection and processing guidelines for BWR coolant pressure".
Published: (1980)

BWR post-scram drywell pressurization.
Published: (1984)

Potential failure of BWR backup manual scram capability.
Published: (1980)

IEB 80-17 supplement 4, failure of control rods to insert during a scram at a BWR.
Published: (1980)

Alternate rod Insertion for BWR scram represents a potential path for loss of primary coolant.
Published: (1981)

Undetected loss of reactor coolant.
Published: (1987)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1981)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1981)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1981)

Safety concerns associated with pipe breaks in the BWR scram system.
Published: (1985)

Torus shells with corrosion and degraded coatings in BWR containments.
Published: (1988)

Depressurization of reactor coolant systems in pressurized-water reactors.
Published: (1987)

IEB 80-17 supplement 1 failure of control rods to insert during a scram at a BWR.
Published: (1980)

The establishment and assessment of Chinshan (BWR/4) Nuclear Power Plant TRACE/SNAP model /
by: Wang, Jong-Rong
Published: (2014)

BWR operation with indicated flow less than natural circulation.
Published: (1996)

Water coolant technology of power reactors /
by: Cohen, P. (Paul)
Published: (1980)

Water coolant technology of power reactors.
by: Cohen, P. (Paul)
Published: (1969)

Suppression pool temperature limits for BWR containments : generic technical activity A-39 /
by: Su, T. M.
Published: (1981)

BWR scram discharge system.
Published: (1980)

BWR scram discharge system.
Published: (1981)

Potential for common-mode failure of high pressure safety injection pumps or release of reactor coolant outside containment during a loss-of-coolant accident.
Published: (1990)

Hydrogen combustion events in foreign BWR piping.
Published: (2002)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

BWR scram system.
Published: (1980)

Diversion of the residual heat removal pump seal cooling water flow during recirculation operation following a loss-of-coolant accident.
Published: (1989)

The development and application of Kuosheng (BWR/6) nuclear power plant TRACE/SNAP model /
by: Shih, Chunkuan
Published: (2014)

Potential for water hammer, thermal stratification, and steam binding in high-pressure coolant Injection piping.
Published: (1989)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Partial plugging of suppression pool strainers at a foreign BWR.
Published: (1992)

Inadvertent reduction in primary coolant inventory in boiling water reactors during shutdown and startup.
Published: (1984)

Recent operating experience on loss of reactor coolant inventory while In a shutdown condition.
Published: (1990)

Assessment and management of ageing of major nuclear power plant components important to safety : BWR pressure vessels.
Published: (2005)

LWR primary coolant system pressure isolation valves.
Published: (1980)