Use of lifted leads and jumpers during maintenance or surveillance testing.

Reactor vessel closure head studs remained detensioned during plant startup.
Published: (2012)

Preconditioning of plant structures, systems, and components before ASME code inservice testing or technical specification surveillance testing.
Published: (1997)

Lack of detailed instruction and inadequate observance of precautions during maintenance and testing of diesel generator Woodward governors.
Published: (1986)

Environmental qualification testing of Rockbestos cables.
Published: (1984)

Heavy component replacement in nuclear power plants : experience and guidelines.
Published: (2008)

Ageing management for nuclear power plants : safety guide.
Published: (2009)

Maintenance deficiency associated with General Electric horizontal custom 8000 induction motors.
Published: (1991)

Evaluation of the broadband impedance spectroscopy prognostic/diagnostic technique for electric cables used in nuclear power plants /
by: Rogovin, D.
Published: (2006)

Cracking of vertical welds in the core shroud and degraded repair.
Published: (1997)

Missing jumpers from Westinghouse reactor protection system cards for the over-power delta temperature trip function.
Published: (1985)

Plant trip and loss of preferred AC power from inadequate switchyard maintenance.
Published: (2005)

Cable insulation resistance measurements made during cable fire tests /
by: Wyant, Francis J.
Published: (2002)

Application of reliability centred maintenance to optimize operation and maintenance in nuclear power plants.
Published: (2008)

Inadequate maintenance of uninterruptible power supplies and inverters.
Published: (1994)

Periodic testing and preventive maintenance of molded case circuit breakers.
Published: (1993)

Control of maintenance and essential equipment.
Published: (1979)

Insulation breakdown of silicone rubber-insulated single conductor cables during high potential testing.
Published: (1987)

Maintenance of nuclear power plants : a safety guide.
Published: (1990)

Problems identified during maintenance rule baseline inspections.
Published: (1997)

Procedural guidance for pipe replacement at BWRS.
Published: (1984)

Manual on maintenance of systems and components important to safety.
Published: (1986)

Metal-clad circuit breaker maintenance issues identified by NRC inspections.
Published: (1998)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

Implementation strategies and tools for condition based maintenance at nuclear power plants.
Published: (2007)

State of the art of electro-mechanical cables /
Published: (1973)

Licensee programs for inspection of electrical raceway and cable installations.
Published: (1985)

Draft regulatory guide DG-1132 : qualification of safety-related cables and field splices for nuclear power plants.
Published: (2007)

Lessons learned from early implementation of the maintenance rule at nine nuclear power plants /
by: Petrone, C. D.
Published: (1995)

Cable heat release, ignition, and spread in tray installations during fire (CHRISTIFIRE) /
by: McGrattan, Kevin B.
Published: (2012)

Maintenance welding in nuclear power plants : proceedings of a conference, August 7-8, 1979, Atlanta /
Published: (1980)

Cable heat release, ignition and spread in tray installations during fire (CHRISTIFIRE) : volume 1, horizontal trays, draft report for comment /
Published: (2010)

Modification of surveillance interval for the electrical protective assemblies in power supplies for the reactor protection.
Published: (1991)

Manual on maintenance coatings for nuclear power plants /
Published: (1990)

Manual on maintenance coatings for nuclear power plants /
Published: (1990)

Implementation of guidance from USI A-12 "Potential for LOW fracture toughness and lamellar tearing on component support.
Published: (1980)

Notice of meeting to discuss final resolution of USI A-12.
Published: (1980)