Failure of hydraulic snubbers as a result of contaminated hydraulic fluid.

Technical specification for snubbers.
Published: (1984)

Recent snubber inservice testing with high failure rates.
Published: (1984)

Guidelines for inservice testing at nuclear power plants : inservice testing of pumps and valves and inservice examination and testing of dynamic restraints (snubbers) at nuclear power plants : draft report for comment /
by: Bedi, Gurjendra S.
Published: (2011)

Criteria for nuclear safety related piping and component support snubbers presented at the Pressure Vessels and Piping Conference, ASME Century 2 - Emerging Technology Conferences, San Francisco, California, August 12-15, 1980 /
Published: (1980)

Effect of radiation on hydraulic snubber fluid.
Published: (1980)

ITT Grinnell figure 306/307 mechanical snubber attachment interference.
Published: (1983)

Mechanical dynamic restraint (snubber) lubricant degradation not identified due to insufficient service life monitoring.
Published: (2015)

Bergen-Paterson hydraulic shock and sway arrestors (HSSA).
Published: (1979)

Component support snubbers : design, application, and testing : presented at the Pressure Vessels and Piping Conference, ASME Century 2--Emerging Technology Conferences, San Francisco, California, August 12-15, 1980 /
Published: (1980)

Snubber lubricant degradation in high-temperature environments.
Published: (1994)

Valve stem corrosion failures.
Published: (1985)

Failure of condensate piping because of erosion-corrosion at a flow-straightening device.
Published: (1995)

Alternative requirements for snubber visual inspection intervals and corrective actions.
Published: (1990)

Type HK circuit breakers missing close latch anti-shock springs.
Published: (1989)

Inservice testing of pumps and valves, and inservice examination and testing of dynamic restraints (snubbers) at nuclear power plants : draft report for comment /
by: Tingen, S. G.
Published: (2010)

Chloride contamination of safety related piping and components.
Published: (1980)

Snubber design applications and minimization methods : presented at the Joint Conference of the Pressure Vessels and Piping, Materials, Nuclear Engineering, Solar Energy Divisions, Denver, Colorado, June 21-25, 1981 /
Published: (1981)

Intergranular stress corrosion cracking leading to steam generator tube failure.
Published: (1984)

Failures of air-operated valves affecting safety-related systems.
Published: (1988)

Standby liquid control system squib valves failure to fire.
Published: (1986)

Safety injection pipe failure.
Published: (1988)

Failure of air check valves to seat.
Published: (1985)

Vibration-induced valve failures.
Published: (1983)

Fatigue crack flaw tolerance in nuclear power plant piping : a basis for improvements to ASME code section XI Appendix L /
Published: (2007)

High-energy piping failures caused by wall thinning.
Published: (1991)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Failure of safety injection valves to operate against differential pressure.
Published: (1981)

Check valve failures.
Published: (1981)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Failure of main steam isolation valves as a result of sticking solenoid pilot valves.
Published: (1995)

Failure of check and stop check valves subjected to low flow conditions.
Published: (1986)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Solenoid-operated valve failures resulted in turbine overspeed.
Published: (1991)

Guidelines for inservice testing at nuclear power plants : inservice testing of pumps and valves and inservice examination and testing of dynamic restraints (snubbers) at nuclear power plants, final report /
by: Bedi, Gurjendra S.
Published: (2013)

Rupture in extraction steam piping as a result of flow-accelerated corrosion.
Published: (1997)

Vibration-induced degradation and failure of safety-related valves.
Published: (2006)