Investigation of the need for in-use dispensing rate limits and fuel nozzle geometry standardization.

Evaluation of resistively heated fuel injection technology to reduce cold start emissions and assist starting driveaway of a methanol fueled vehicle /
by: Piotrowski, Gregory K., et al.
Published: (1992)

Investigation of spray for characteristics for flashing injection of fuels containing dissolved air and superheated fuels /
by: Solomon, A. S. P.
Published: (1982)

Potential for top nozzle separation and dropping of a certain type of Westinghouse fuel assembly.
Published: (2002)

A convergent nozzle for the standardisation of thrust-rig measurements /
by: Herbert, M. V.
Published: (1969)

Fuel systems for IC engines : 14-15 March 2012, IMechE, London /
Published: (2012)

Development of microprocessor control for a V-6 engine fueled by prevaporized methanol /
by: Schneider, Donald F., 1961-
Published: (1985)

Spray characteristics of two types of fuel injectors /
by: Hahn, Jeffrey P., et al.
Published: (1993)

Exhaust emissions from a heavy duty diesel engine equipped with a high pressure common rail fuel injection system /
by: Pagán, Jaime
Published: (1997)

Advanced Direct Injection Combustion Engine Technologies and Development : Gasoline And Gas Engines.
by: Zhao, H.
Published: (2009)

Progress report for propulsion materials : FY 2000 /
Published: (2000)

Effects of nozzle exit geometry and pressure ratio on plume shape for nozzles exhausting into quiescent air /
by: Scallion, W. I.
Published: (1991)

L'injection electronique.
Published: (1990)

Advanced direct injection combustion engine technologies and development /
Published: (2010)

Exhaust emissions from a passenger automobile equipped with electronic fuel injection /
by: Thomson, John C.
Published: (1970)

Emissions and fuel economy effects of the W/A WAAG-injection system.
Published: (1980)

Common rail fuel injection technology in diesel engines /
by: Ouyang, Guangyao, et al.
Published: (2019)

Electronic diesel and gasoline fuel injection technology.
Published: (1998)

Characteristics of sewage-sprinkler nozzles /
by: Wiley, Ralph Benjamin
Published: (1925)

Advanced direct injection combustion engine technologies and development.
Published: (2010)

Cracking in pressurizer safety and relief nozzles and in surge line nozzle.
Published: (2004)

Evaluation of the feasibility of liquid fillneck seals.
Published: (1986)

Evaluation of a porous silicon carbide resistive start catalyst on a methanol-fueled vehicle /
by: Breutsch, Robert I.
Published: (1988)

Coefficients of discharge of sewage-sprinkler nozzles /
by: Greve, Frederick William, 1885-
Published: (1919)

The effects of base bleed on plug nozzles /
by: Reid, J.
Published: (1967)

High resolution numerical simulations of primary atomization in diesel sprays with single component reference fuels /
by: Bravo, L.
Published: (2015)

Design of a supersonic nozzle /
by: McCabe, A.
Published: (1967)

The performance of supersonic turbine nozzles /
by: Stratford, B. S.
Published: (1962)

Gas flow in nozzles /
by: Pirumov, Ul
Published: (1986)

Research on flow nozzles /
Published: (1948)

Methodology for three dimensional nozzle design /
by: Ferri, Aldo A., et al.
Published: (1974)

An experiment on aerodynamic nozzles at M = 2 /
by: Reid, J.
Published: (1964)

Real-air effects in propelling nozzles /
by: Ascough, John Cecil
Published: (1968)

Analysis and design of optimized truncated scarfed nozzles subject to external flow effects /
by: Shyne, Rickey J.
Published: (1990)

Leakage found on bottom-mounted instrumentation nozzles.
Published: (2003)

A theoretical study of annular supersonic nozzles /
by: Lord, W. T.
Published: (1961)

EPA evaluation of the "W/A WAAG-injection system".
Published: (1980)