Cover Image

Resistively heated catalytic converter with air injection for oxidation of carbon monoxide and hydrocarbons at reduced ambient temperatures /

Bibliographic Details
Main Author:	Piotrowski, Gregory K. (Author)
Format:	Government Document eBook
Language:	English
Published:	Ann Arbor, Michigan : U.S. Environmental Protection Agency, Office of Air and Radiation, Office of Mobile Sources, Emission Control Technology Division, Control Technology and Applications Branch, September 1989.
Subjects:	Motor vehicles > Motors > Exhaust gas > Testing. Motor vehicles > United States > Motors > Exhaust gas > Standards. Motor vehicles > Catalytic converters > Testing. Carbon monoxide > Oxidation > Testing. Hydrocarbons > Oxidation > Testing.
Online Access:	https://purl.fdlp.gov/GPO/gpo125694

Similar Items

Evaluation of a resistively heated metal monolith catalytic converter on a gasoline-fueled vehicle /
by: Piotrowski, Gregory K.
Published: (1988)

Exhaust emissions from three low-emission vehicles using catalytic converters /
by: Thomson, John C.
Published: (1971)

Catalyst activity test sequence (CATS) /
by: Danyko, Donald D., et al.
Published: (1984)

Evaluation of a resistively heated metal monolith catalytic converter on an M100 neat methanol-fueled vehicle.
by: Piotrowski, Gregory K., et al.
Published: (1988)

Resistively heated methanol dissociator for engine cold start assist : interim report II /
by: Piotrowski, Gregory K.
Published: (1989)

An evaluation of three-way control single and dual bed catalysts as applied to heavy-duty gasoline engines /
by: Nugent, Thomas
Published: (1981)

Catalyst poisoning and catalyst recovery due to misfueling : final report /
Published: (1979)

Determination of a range of concern for mobile source emissions of ammonia /
by: Garbe, Robert J.
Published: (1981)

An evaluation of a variable cam timing technique as a control method for oxides of nitrogen /
by: Thomson, John C.
Published: (1970)

The determination of a range of concern for mobile source emissions of sulfuric acid /
by: Harvey, Craig A., et al.
Published: (1981)

Determination of a range of concern for mobile source emissions of hydrogen sulfide /
by: Harvey, Craig A.
Published: (1982)

Durability testing of an M100-fueled Toyota LCS-M Carina equipped with a resistively heated catalytic converter /
by: Piotrowski, Gregory K.
Published: (1990)

Durability of oxygen sensors /
by: Snapp, Lisa
Published: (1985)

Formation and control of combustion pollutants from gasoline-fueled spark-ignition motor vehicle engines /
by: Bozek, John W.
Published: (1992)

Status report on the CO "hot spot" project /
by: Wolcott, Mark
Published: (1978)

Technical feasibility of the proposed 1982-1983 high altitude standards for light duty vehicles and light duty trucks /
by: Bruetsch, Robert I., et al.
Published: (1980)

Particulate measurement - vehicle preconditioning /
by: Danielson, Eugene
Published: (1979)

Methanol vehicle catalyst evaluation : phase III /
by: Piotrowski, Gregory K.
Published: (1988)

Exhaust emissions from a vehicle equipped with the Roberts induction modification supplied under contract CPA 70-51 /
by: Thomson, John C.
Published: (1970)

Directory of information for dynamometer testing of 1979-1981 light duty motor vehicles /
Published: (1981)

Interim report on durability testing of low cost catalysts for methanol-fueled vehicles /
by: Wagner, Robert D., et al.
Published: (1984)

A study of one gasoline-fueled engine line comparing emission results between 1969 engines and 1979 engines on three test procedures : the heavy-duty transient engine test, the heavy-duty 9-mode engine test, and the light-duty truck chassis test /
by: Clemmens, William B., et al.
Published: (1979)

Durability testing of a Toyota LCS-M Carina /
by: Piotrowski, Gregory K.
Published: (1989)

In-house test program report no. 5 : hot soak temperature constraints /
by: Rarick, Thomas
Published: (1976)

Estimation of trip- and emission-weighted temperatures for MOBILE4 /
by: Shih, Celia
Published: (1990)

Investigation into hydrogen sulfide odor problem on a privately-owned, catalytic converter-equipped 1975 automobile.
Published: (1975)

Analysis of emissions deterioration using Ohio and Wisconsin IM240 data /
by: Enns, Phil
Published: (2002)

Analysis of emissions deterioration using Ohio and Wisconsin IM240 data : M6. EXH.002 : draft /
by: Enns, Phil
Published: (1999)

An evaluation of the exhaust emissions from two vehicles equipped with compressed natural gas conversion kits /
by: Thomson, John C.
Published: (1970)

Independent motor vehicle emissions contract laboratories /
Published: (2001)

Independent motor vehicle emissions contract laboratories.
Published: (1999)

Interim report for EPA/EMA cooperative test program /
by: Azary, Alex
Published: (1982)

Low mileage catalyst evaluation with a methanol-fueled Rabbit : interim report /
by: Wagner, Robert D., et al.
Published: (1983)

Low mileage catalyst evaluation with a methanol-fueled Rabbit : second interim report /
by: Wagner, Robert D., et al.
Published: (1984)

Chassis dynamometer testing : addressing the challenges of new global legislation /
by: Galindo, Eduardo (Automobile engineer), et al.
Published: (2017)

Evaluation of the SCATPAC device.
Published: (1973)

An evaluation of Aquablast's Wyman valves.
Published: (1973)

Evaluation of the Hydro-Catalyst Corporation pre-combustion catalyst.
Published: (1973)

Evaluation of the Landrum retrofit system /
by: Gompf, Henry L.
Published: (1972)

Characterization of in-use emissions from TxDOT's non-road equipment fleet : final report /
Published: (2010)