Cover Image

A track to twin roll dynamometer comparison of several different methods of vehicle velocity simulation /

Bibliographic Details
Main Author:	Yurko, John (Author)
Format:	Government Document eBook
Language:	English
Published:	[Ann Arbor, Mich.] : Standards Development and Support Branch, Emission Control Technology Division, Office of Mobile Source Air Pollution Control, Office of Air, Noise and Radiation, U.S. Environmental Protection Agency, June 1979.
Subjects:	Vehicles > United States > Speed. Automobiles > Motors > Exhaust gas > United States. Dynamometer. Technical reports.
Online Access:	https://purl.fdlp.gov/GPO/gpo128971

Similar Items

Chassis dynamometer testing : addressing the challenges of new global legislation /
by: Galindo, Eduardo (Automobile engineer), et al.
Published: (2017)

Directory of information for dynamometer testing of 1979-1981 light duty motor vehicles /
Published: (1981)

Vehicle test results from a small twin-roll electric dynamometer /
by: Thompson, Glenn D., et al.
Published: (1987)

Vehicle efficiency - road vs. dynamometer /
by: Grugett, Bruce
Published: (1979)

Performance and cost analysis of chassis dynamometers /
by: Leiferman, Michael W.
Published: (1976)

An innovative dynamometer : free running rollers to provide cheap representative roadside emission procedure /
by: Latham, S.
Published: (2007)

Tire-dynamometer roll effects /
by: Burgeson, Richard N.
Published: (1978)

TTI track/dynamometer study : final report /
by: Reineman, Martin, et al.
Published: (1983)

Computer simulation of tire slip on a Clayton twin roll dynamometer /
by: Yurko, John
Published: (1979)

Effects of dynamometer variability on the confirmation of requests for alternate dynamometer power absorption /
by: Thompson, Glenn D.
Published: (1978)

A brief treatise on the problems associated with using one vehicle to determine the dynamometer power absorption for a second similar vehicle /
by: Thompson, Glenn D.
Published: (1978)

Prediction of dynamometer power absorption to simulate light-duty vehicle road load /
by: Thompson, Glenn D.
Published: (1977)

The effect of dynamometer inertia increment and power setting on emissions and fuel economy for motorcycles.
Published: (1975)

Particulate measurement - evaluation of the equivalency of the three-bag and four-bag LA-4 dynamometer test procedures /
by: Danielson, Eugene
Published: (1979)

Temperature comparison : on-road versus dynamometer cooling /
by: Sharman, Edward H.
Published: (1977)

Proceedings of the EPA/Industry Emissions Testing Practices Symposium. August 16, 1979, 9:00 a.m. - 4:00 p.m. /
Published: (1979)

The IM240 transient I/M dynamometer driving schedule and the composite I/M test procedure /
by: Pidgeon, William M., et al.
Published: (1991)

Temperature comparison : on-road versus dynamometer cooling : final report /
by: Sharman, Edward H.
Published: (1977)

Comparison of dynamometer power absorption characteristics and vehicle road load measurements /
by: Thompson, Glenn D., et al.
Published: (1977)

Investigation of the requested alternate dynamometer power absorption for the Ford Fiesta /
by: Thompson, Glenn D.
Published: (1978)

Dynamometers and the measurement of power : a treatise on the construction and application of dynamometers, by John J. Flather.
by: Flather, John Joseph, 1862-1926
Published: (1907)

Tire slip on the Clayton dynamometer /
by: Burgeson, Richard, et al.
Published: (1978)

Investigation of the requested alternate dynamometer power absorption for the Ford LTD /
by: Thompson, Glenn D.
Published: (1978)

Investigation of the requested alternate dynamometer power absorption for the Ford Mercury Marquis /
by: Thompson, Glenn D.
Published: (1978)

Comparison between a double-roll and a flat-bed dynamometer configuration in regards to passenger-car tire power consumption, fuel economy and exhaust emissions /
by: Bogdan, L. (Leonard)
Published: (1979)

Proceedings of the EPA/Industry quality control symposium. June 29, 1977, 9:00 a.m. - 4:00 p.m.
Published: (1977)

Comparison of fuel economy values from the preconditioning and measuring cycles of the highway fuel economy test procedure /
by: Torres, Myriam
Published: (1978)

A summary and analysis of comments received in response to the EPA/NHTSA information request regarding the effects of test procedure changes on fuel economy /
by: Hourihane, James, et al.
Published: (1980)

Independent coastdown road load power determination for ten diverse production vehicles /
by: Newell, Terry (Terry P.)
Published: (1980)

Motor Vehicle Emission Simulator (MOVES) : user guide for MOVES2010b.
Published: (2012)

Motor Vehicle Emission Simulator (MOVES) 2010 : user guide /
Published: (2009)

Particulate measurement - vehicle preconditioning /
by: Danielson, Eugene
Published: (1979)

Tyre rolling resistance measurements on road and dynamometer (5.20 X 13, cross-ply tyre) /
by: Carr, G. W.
Published: (1967)

Clayton dynamometer-to-road tire rolling resistance relationship /
by: Burgeson, Richard N.
Published: (1978)

Summary and analysis of comments received in response to draft EPA procedures for the measurement of tire rolling resistance and subsequent grading and labeling of tires /
by: Thompson, Glenn D.
Published: (1980)

Technical feasibility of the proposed 1982-1983 high altitude standards for light duty vehicles and light duty trucks /
by: Bruetsch, Robert I., et al.
Published: (1980)

The vehicle road load problem-an approach by non-linear modeling /
by: Thompson, Glenn D.
Published: (1975)

Passenger car fuel economy : dynamometer vs. track vs. road.
Published: (1975)

Fuel economy and emissions from five medium duty vehicles.
Published: (1974)

Vehicle speeds and operating costs : models for road planning and management /
by: Thawat Watanatada
Published: (1987)