http://www.loc.gov/mods/v3 http://www.loc.gov/standards/mods/v3/mods-3-2.xsd
Wet combustion and water vapor pump-cycle efficiency
Intro; Table of Contents; The Author; Acknowledgements; Remerciements; Abstract; Résumé; Introduction; Correlation between fossil energy consumption and economic development; The stability of fossil fuels' place in the world; Combustion, pollution and health; Global pollution or the peril of planet temperature elevation; In the context of growing energy demand, what about other energy sources...?; Chapter One; 1.1 Definition of Wet Combustion; 1.2 General advantages of Wet Combustion; 1.3 Wet combustion with the Water Vapor Pump-cycle; 1.4 Water Vapor Pump-cycle efficiency
1.5 Water vapor pump-cycle applications1.6 About additional water introduction technologies; 1.7 Limits and general precautions for additive water; 1.8 More details about the additional impact of water on combustion; 1.9 About water and material characteristics; Chapter Two; 2.1 A reference to the first thermodynamics principle; 2.2 The dimensionless enthalpy of combustion products; 2.3 The wet bulb temperature; 2.4 The inlet enthalpies; 2.5 Enthalpies derivatives expressions; 2.6 A combustion hygrometric image; 2.7 CHD and metrology; 2.8 The composition of combustion products
2.9 More about the water dew point temperature calculationChapter Three; 3.1 Traditional water heater efficiency; 3.2 Condensing boilers and the WVP cycle; 3.3 Efficiency anticipation of a HAT (Humidified Air Turbine cycle); 3.4 Efficiency anticipation of a STIG (Steam in Gas turbine cycle) equipped with a water vapor pump exchanger on a cogeneration (or heat and power recovery) site; 3.5 Direct contact heaters; 3.6 The water vapor pump exchanger efficiency; 3.7 Graphic study of a water plume formation; 3.8 Monophasic and biphasic exchanges analogy; 3.9 Examples of biphase exchanger sizing
ConclusionAnnexes; A.1 Bibliography; A.2 Numerical tables; A.3 Reminders relating to the determination of the convection exchange coefficients and load losses in flows...; A.4 Example of porous membrane sizing; A.5 Example of post-combustion boiler efficiency analysis with the CHD method; A.6 Nomenclature; A.7 Diagrams, CHD drawings
Newcastle-upon-Tyne : Cambridge Scholars Publisher,c2019