Cover Image

Preliminary nonlinear structural analysis of advanced composite tow-steered shells with large geometric imperfections /

Bibliographic Details
Main Authors:	Dobrin, Calvin P. (Author), Wu, K. Chauncey (Author), Stanford, Bret K. (Author)
Format:	Government Document eBook
Language:	English
Published:	Hampton, Virginia : National Aeronautics and Space Administration, Langley Research Center, October 2019.
Series:	NASA technical memorandum ; 2019-220413.
Subjects:	Axial loads. Defects. Composite structures. Displacement. Thickness.
Online Access:	https://purl.fdlp.gov/GPO/gpo128222

Similar Items

Aeroelastic tailoring via tow steered composites /
by: Stanford, Bret K., et al.
Published: (2014)

Unit-sphere anisotropic multiaxial stochastic-strength model probability density distribution for the orientation of critical flaws /
by: Nemeth, Noel N.
Published: (2013)

Axial and torsional fatigue behavior of Waspaloy /
by: Zamrik, S. Y., 1932-
Published: (1986)

Derivation of the data reduction equations for the calibration of the six-component thrust stand in the CE-22 advanced nozzle test facility /
by: Wong, Kin C.
Published: (2003)

Buckling test results from the 8-foot-diameter orthogrid-stiffened cylinder test article TA01 : test dates: 19-21 November 2008 /
by: Hilburger, Mark W. (Mark William), et al.
Published: (2015)

An Approximate solution and master curves for buckling of symmetrically laminated composite cylinders /
by: Nemeth, Michael P.
Published: (2013)

Evaluation of the behavior of Technova Corporation rod-stiffened stitched compression specimens /
by: Dawn C. Jegley
Published: (2013)

Enhancements of tow-steering design techniques : design of rectangular panel under combined loads /
by: Tatting, Brian F.
Published: (2005)

Normalization of impact energy by laminate thickness for compression after impact testing /
by: Nettles, A. T. (Alan T.), et al.
Published: (2013)

Bearing-load modeling and analysis study for mechanically connected structures /
by: Knight, Norman F.
Published: (2006)

Forced response testing of anaxi-centrifugal turboshaft engine /
by: Owen, A. Karl
Published: (1996)

A data acquisition and control program for axial-torsional fatigue testing /
by: Kalluri, Sreeramesh
Published: (1989)

A data acquisition and control program for axial-torsional fatigue testing /
by: Kalluri, Sreeramesh
Published: (1989)

VAB Sway Investigation /
by: Youngquist, Robert C.
Published: (2013)

Curved displacement transfer functions for geometric nonlinear large deformation structure shape predictions /
by: Ko, William L., et al.
Published: (2017)

The effect of interface roughness and oxide film thickness on the inelastic response of thermal barrier coatings to thermal cycling /
by: Pindera, M.-J. (Marek-Jerzy), 1951-, et al.
Published: (1999)

Determination of yield in Inconel 718 for axial-torsional loading at temperatures up to 649°C /
by: Gil, Christopher M., et al.
Published: (1998)

BOREAS TE-12 SSA shoot geometry data /
Published: (2000)

Method for estimating operational loads on aerospace structures using span-wisely distributed surface strains /
by: Ko, William L., et al.
Published: (2013)

The exact solution for linear thermoelastic axisymmetric deformations of generally laminated circular cylindrical shells /
by: Nemeth, Michael P., et al.
Published: (2012)

Single transducer ultrasonic imaging method that eliminates the effect of plate thickness variation in the image /
by: Roth, Don J.
Published: (1996)

Comprehensive structural dynamic analysis of the SSME/AT fuel pump first-stage turbine blade /
by: Brown, A. M.
Published: (1998)

Performance of a high-work, low-aspect-ratio turbine tested with a realistic inlet radial temperature profile /
by: Stabe, Roy G.
Published: (1984)

Results of the round robin on opening-load measurement : conducted by ASTM Task Group E24.04.04 on crack closure measurement and analysis /
by: Phillips, Edward P.
Published: (1989)

The effect of sliding speed on film thickness and pressure supporting ability of a point contact under zero entrainment velocity conditions /
by: Thompson, Peter M.
Published: (2000)

Experimental study of load carrying capacity of point contacts at zero entrainment velocity /
by: Shogrin, Bradley
Published: (1998)

A design methodology for optimizing and integrating composite materials in gear structures /
by: Johnston, Joel P., et al.
Published: (2019)

Orbit transfer vehicle engine technology program combustor wall condition monitoring, subtask II, task E.5 /
by: Szemenyei, B. L.
Published: (1988)

Thickness measurement device for ice/water mixture /
Published: (1996)

Axial-torsional fatigue : a study of tubular specimen thickness effects /
by: Bonacuse, Peter J., 1960-, et al.
Published: (1990)

Exploration of failure and potential damage markers in Ti-6A1-4V /
by: Lerch, Bradley A., et al.
Published: (2019)

The intermediate wake of a thick flat plate with a circular trailing edge /
by: Raj, Man Mohan
Published: (2019)

Deep impact Delta II Launch Vehicle cracked thick film coating on electronic packages technical consultation report /
Published: (2009)

Effect of temperature gradient on thick film selective emitter emittance /
by: Chubb, Donald L.
Published: (1997)

Theoretical and software considerations for nonlinear dynamic analysis /
by: Schmidt, Richard J.
Published: (1983)

Uniaxial stretching of poly(keto-ether-imide) films /
by: Hinkley, Jeffrey A.
Published: (1999)

Combining through-thickness reinforcement and self-healing for improved damage tolerance and durability of composites /
by: O'Brien, T. Kevin
Published: (2013)

Remote measurement of ice thickness on the shuttle external tank surface /
by: Singh, Jag J.
Published: (1990)

Free-edge delamination : laminate width and loading conditions effects /
by: Murthy, P. L. N., et al.
Published: (1987)

Optical thickness as related to pollutant episodes and the concentration of visibility degrading pollutants /
by: Prospero, Joseph M.
Published: (1983)