Cover Image

Replacement diaphragms for Robertshaw valve (model no. VC-210).

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1981.
Series:	Information notice ; 81-36.
Subjects:	Nuclear power plants > Piping > Valves. Diaphragms (Mechanical devices)
Online Access:	https://purl.fdlp.gov/GPO/gpo130178

Similar Items

Diaphragm failure in scram outlet valve causing rod insertion.
Published: (1986)

Inadequate seismic qualification of diaphragm valves by mathematical modeling and analysis.
Published: (1987)

Degradation of static "O" ring pressure switches.
Published: (1987)

Robertshaw thermostatic flow control valves.
Published: (1982)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Potentially substandard valve replacement parts.
Published: (1988)

Problems with diaphragms in safety-related tanks.
Published: (1991)

Flat and Corrugated Diaphragm Design Handbook /
by: Di Giovanni
Published: (2017)

Slow five percent scram insertion times caused by viton diaphragms in scram solenoid pilot valves.
Published: (1996)

The diaphragm cell ; theory and practice of the diaphragm cell for liquid diffusion measurements /
by: Mills, R. (Reginald), 1917-
Published: (1968)

Valve stem corrosion failures.
Published: (1985)

Water hammer and possible piping damage caused by misapplication of Kerotest packless metal diaphragm globe valves.
Published: (1988)

Measured opening characteristics of an electromagnetically opened diaphragm for the Langley expansion tunnel /
by: Moore, John A.
Published: (1976)

Check valve problems.
Published: (1982)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Flat and corrugated diaphragm design handbook /
by: Di Giovanni, Mario, 1911-
Published: (1982)

Velan swing check valves.
Published: (1981)

Failure of air check valves to seat.
Published: (1985)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Check valve failures.
Published: (1981)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

Valve body erosion.
Published: (1989)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Malfunction of a pressurized code safety valve.
Published: (1993)

Failures of nut-locking devices in check-valves.
Published: (1993)

Motor-operated valve inoperable due to stem-disc separation.
Published: (2012)

Periodic verification of leak tight integrity of pressure isolation valves.
Published: (1987)

Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)

Consideration of the stem rejection load in calculation of required valve thrust.
Published: (1992)

Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)

Failures of Rockwell International globe valves.
Published: (1984)

Valve-stem failure caused by embrittlement.
Published: (1992)

Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)

Failure of check and stop check valves subjected to low flow conditions.
Published: (1986)

Failures of main steam isolation valves.
Published: (1988)