Cover Image

Failure of safety injection valves to operate against differential pressure.

Bibliographic Details
Corporate Author:	U.S. Nuclear Regulatory Commission. Office of Inspection and Enforcement
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Inspection and Enforcement, 1981.
Series:	NRC information notice ; 81-31.
Subjects:	Nuclear power plants > Piping > Valves > Defects. Nuclear power plants > Safety measures.
Online Access:	https://purl.fdlp.gov/GPO/gpo130194

Similar Items

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Check valve failures.
Published: (1981)

Failures of Rockwell International globe valves.
Published: (1984)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)

Failures of air-operated valves affecting safety-related systems.
Published: (1988)

Failures of nut-locking devices in check-valves.
Published: (1993)

Vibration-induced valve failures.
Published: (1983)

Failure of safety/relief valve discharge line vacuum breakers.
Published: (1983)

Failure of Borg-Warner gate valves to close against differential pressure.
Published: (1989)

Boiling water reactor safety/relief valve failures.
Published: (1983)

Malfunction of Borg-Warner bolted bonnet check valves caused by failure of the swing arm.
Published: (1990)

Failure of safety/relief valves to open at BWR--final report.
Published: (1983)

Failure of soft seat valve seals.
Published: (1984)

Main steam safety valve failures caused by failed cotter pins.
Published: (1984)

RCIC and HPCI turbine exhaust check valve failures.
Published: (1982)

Standby liquid control system squib valves failure to fire.
Published: (1986)

Failure of yokes installed on Walworth gate and globe valves.
Published: (1993)

Pressurizer safety valve reliability.
Published: (1986)

Licensee report of defective refurbished valves.
Published: (1988)

Failure of safety/relief valves to open at a BWR.
Published: (1982)

Deficient operator actions following dual function valve failures.
Published: (1986)

Valve stem corrosion failures.
Published: (1985)

Failures of Hiller actuators upon gradual loss of air pressure.
Published: (1982)

Potential design deficiency in motor-operated valve control circuitry.
Published: (2013)

Check valve failures on diesel generator engine cooling system.
Published: (1982)

Loss of shutdown cooling during disassembly of high pressure safety injection system check valve.
Published: (1991)

Failure of safety/relief valves to open at BWR--interim report.
Published: (1983)

Common mode failure of main steam isolation nonreturn check valves.
Published: (1983)

Potential pressure-locking of safety-related power-operated gate valves.
Published: (1995)

Failure of elastomer seated butterfly valves used only during cold shutdowns.
Published: (1984)

Potential clogging of high pressure safety injection throttle valves during recirculation.
Published: (1996)

Potential deficiency in motor-operated valve control circuits and annunciation.
Published: (1984)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Potential deficiencies in environmental qualification of Limitorque motor valve operator wiring.
Published: (1986)

Failure of motor-operated valve electric power train due to sheared or dislodged motor pinion gear key.
Published: (1994)

Safety injection pipe failure.
Published: (1988)

Results of validation testing of motor-operated valve diagnosis equipment.
Published: (1992)

Motor-operated valve failures due to hammering effect.
Published: (1985)