Velan swing check valves.
| Format: | Government Document eBook |
|---|---|
| Language: | English |
| Published: |
Washington, D.C. :
United States Nuclear Regulatory Commission, Office of Inspection and Enforcement,
1981.
|
| Series: | Information notice ;
81-30. |
| Subjects: | |
| Online Access: | https://purl.fdlp.gov/GPO/gpo130176 |
Similar Items
Failure of anti-rotation keys in motor-operated valves manufactured by Velan.
Published: (1993)
Published: (1993)
Problems with incorrectedly-installed swing-check valves.
Published: (2001)
Published: (2001)
Malfunction of Borg-Warner bolted bonnet check valves caused by failure of the swing arm.
Published: (1990)
Published: (1990)
Check valve problems.
Published: (1982)
Published: (1982)
Broken retaining block studs on Anchor Darling check valves.
Published: (1988)
Published: (1988)
Failures of nut-locking devices in check-valves.
Published: (1993)
Published: (1993)
Check valve failures.
Published: (1981)
Published: (1981)
Failure of air check valves to seat.
Published: (1985)
Published: (1985)
Failure of check and stop check valves subjected to low flow conditions.
Published: (1986)
Published: (1986)
Valve stem corrosion failures.
Published: (1985)
Published: (1985)
Failures of main steam isolation check valves resulting in disc separation.
Published: (1990)
Published: (1990)
Shaft seal packing causes binding in main steam swing disc check and isolation valves.
Published: (1980)
Published: (1980)
Check valve inservice testing program deficiencies.
Published: (1988)
Published: (1988)
Instrument failure causes opening of PORV and block valve.
Published: (1980)
Published: (1980)
Common mode failure of main steam isolation nonreturn check valves.
Published: (1983)
Published: (1983)
Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)
Published: (1990)
Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)
Published: (1991)
AnchorDarling double disc gate valve check pin and stem-disc separation failures.
Published: (2017)
Published: (2017)
Malfunction of a pressurized code safety valve.
Published: (1993)
Published: (1993)
Failure of a main steam safety valve to reseat caused by an improperly installed release nut.
Published: (1996)
Published: (1996)
Potentially substandard valve replacement parts.
Published: (1988)
Published: (1988)
Locking devices inadequately installed on main steam isolation valves.
Published: (1981)
Published: (1981)
Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)
Published: (1995)
Valves for power plant development and testing : international conference, 4-6 April 1989, University of Southampton /
Published: (1989)
Published: (1989)
Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)
Published: (1982)
Failures of main steam isolation valves.
Published: (1988)
Published: (1988)
Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)
Published: (1990)
Horizontally-installed motor-operated gate valves.
Published: (1992)
Published: (1992)
Changes In pressurizer safety valve setpoints before installation.
Published: (1991)
Published: (1991)
Problems with Copes-Vulcan pressurized power-operated relief valves.
Published: (1994)
Published: (1994)
Motor-operated valve failures due to hammering effect.
Published: (1985)
Published: (1985)
Effects of changing valve motor-operator switch settings.
Published: (1986)
Published: (1986)
Valve body erosion.
Published: (1989)
Published: (1989)
A study of air-operated valves in U.S. nuclear power plants /
by: Rothberg, O. (Owen)
Published: (2000)
by: Rothberg, O. (Owen)
Published: (2000)
Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)
Published: (1994)
Failures of motor-operated valves due to degraded stem lubricant.
Published: (2010)
Published: (2010)
Consideration of the stem rejection load in calculation of required valve thrust.
Published: (1992)
Published: (1992)
Motor-operated valve inoperable due to stem-disc separation.
Published: (2012)
Published: (2012)
Periodic verification of leak tight integrity of pressure isolation valves.
Published: (1987)
Published: (1987)
Motor-operated valve failure caused by stem protector pipe interference.
Published: (1995)
Published: (1995)