Cover Image

In-house test program report no. 5 : hot soak temperature constraints /

Show other versions (1)

Bibliographic Details
Main Author:	Rarick, Thomas (Author)
Format:	Government Document eBook
Language:	English
Published:	[Ann Arbor, Mich.] : Standards Development and Support Branch, Emission Control Technology Division, Office of Mobile Source Air Pollution Control, Office of Air and Waste Management, U.S. Environmental Protection Agency, February, 1976.
Subjects:	Motor vehicles > Motors > Exhaust gas > Testing. Motor vehicles > Pollution control devices > Testing. Motor vehicles > Motors > Exhaust gas > Effect of temperature on. Air quality management > United States.
Online Access:	https://purl.fdlp.gov/GPO/gpo131727

Similar Items

Estimation of trip- and emission-weighted temperatures for MOBILE4 /
by: Shih, Celia
Published: (1990)

In-house test program report no. 2 : vehicle preconditioning: LA-4 vs. HFET.
by: Rarick, Thomas
Published: (1975)

Analysis of emissions deterioration using Ohio and Wisconsin IM240 data /
by: Enns, Phil
Published: (2002)

Analysis of emissions deterioration using Ohio and Wisconsin IM240 data : M6. EXH.002 : draft /
by: Enns, Phil
Published: (1999)

Formation and control of combustion pollutants from gasoline-fueled spark-ignition motor vehicle engines /
by: Bozek, John W.
Published: (1992)

Exhaust emissions from a vehicle equipped with the Roberts induction modification supplied under contract CPA 70-51 /
by: Thomson, John C.
Published: (1970)

Evaluation of the SCATPAC device.
Published: (1973)

An evaluation of Aquablast's Wyman valves.
Published: (1973)

Evaluation of the Hydro-Catalyst Corporation pre-combustion catalyst.
Published: (1973)

Evaluation of the Landrum retrofit system /
by: Gompf, Henry L.
Published: (1972)

Interim report for EPA/EMA cooperative test program /
by: Azary, Alex
Published: (1982)

A study of one gasoline-fueled engine line comparing emission results between 1969 engines and 1979 engines on three test procedures : the heavy-duty transient engine test, the heavy-duty 9-mode engine test, and the light-duty truck chassis test /
by: Clemmens, William B., et al.
Published: (1979)

Technical feasibility of the proposed 1982-1983 high altitude standards for light duty vehicles and light duty trucks /
by: Bruetsch, Robert I., et al.
Published: (1980)

Emissions and fuel economy testing of a Naval Academy heat balanced engine (NAHBE).
Published: (1978)

Evaluation of the Spritzer emission control device.
Published: (1973)

Determination of a range of concern for mobile source emissions of ammonia /
by: Garbe, Robert J.
Published: (1981)

Light-duty diesel gaseous emissions measurement - comparison of dilution tunnel test results to certification cell test results /
by: Alson, Jeff
Published: (1979)

Independent vehicle emissions testing laboratory listing /
Published: (2009)

Evaluation of the impact on emissions and fuel economy of converting two vehicles to compressed natural gas fuel /
by: Penninga, Thomas J.
Published: (1981)

The determination of a range of concern for mobile source emissions of sulfuric acid /
by: Harvey, Craig A., et al.
Published: (1981)

Determination of a range of concern for mobile source emissions of hydrogen sulfide /
by: Harvey, Craig A.
Published: (1982)

Exhaust emissions tests of the Carter steam car.
Published: (1974)

Evaluation of the fuel maximiser U+2122 : a retrofit fuel economy device /
by: Penninga, Thomas J.
Published: (1981)

Fuel economy and emissions from five medium duty vehicles.
Published: (1974)

Diesel emissions and their control /
by: Majewski, W. Addy
Published: (2006)

Exhaust emissions from a vehicle retrofitted with the Monocar HC control system /
by: Austin, Thomas C.
Published: (1972)

Directory of information for dynamometer testing of 1979-1981 light duty motor vehicles /
Published: (1981)

An evaluation of the EI-5 fuel additive.
Published: (1976)

Evaluation of a four-mode steady-state test with acceleration simulation modes as an alternative inspection and maintenance test for enhanced I/M programs /
by: Pidgeon, William, M.
Published: (1993)

Evaluation of the Stone Industrial Corporation copper-plated combustion chamber concept.
Published: (1973)

A second evaluation of the Questor emission control system /
by: Austin, Thomas C.
Published: (1972)

Operation of a pilot motor vehicle inspection station in Houston, Texas /
by: Arrigo, Anthony, J.
Published: (1980)

An evaluation of three-way control single and dual bed catalysts as applied to heavy-duty gasoline engines /
by: Nugent, Thomas
Published: (1981)

An evaluation of a variable cam timing technique as a control method for oxides of nitrogen /
by: Thomson, John C.
Published: (1970)

The Mark II vapor injector : an air-vapor bleed device evaluated.
Published: (1976)

Mini turbo-charger air bleed : evaluation on a light duty gasoline powered vehicle.
Published: (1976)

High-tech inspection and maintenance tests : (procedures and equipment) /
Published: (1994)

Catalyst activity test sequence (CATS) /
by: Danyko, Donald D., et al.
Published: (1984)

Particulate measurement - vehicle preconditioning /
by: Danielson, Eugene
Published: (1979)

Exhaust emissions and fuel economy of a diesel-powered Citroen Sedan.
Published: (1976)