Exploration of failure and potential damage markers in Ti-6A1-4V /

Buckling test results from the 8-foot-diameter orthogrid-stiffened cylinder test article TA01 : test dates: 19-21 November 2008 /
by: Hilburger, Mark W. (Mark William), et al.
Published: (2015)

Determination of yield in Inconel 718 for axial-torsional loading at temperatures up to 649°C /
by: Gil, Christopher M., et al.
Published: (1998)

A data acquisition and control program for axial-torsional fatigue testing /
by: Kalluri, Sreeramesh
Published: (1989)

A data acquisition and control program for axial-torsional fatigue testing /
by: Kalluri, Sreeramesh
Published: (1989)

The exact solution for linear thermoelastic axisymmetric deformations of generally laminated circular cylindrical shells /
by: Nemeth, Michael P., et al.
Published: (2012)

Unit-sphere anisotropic multiaxial stochastic-strength model probability density distribution for the orientation of critical flaws /
by: Nemeth, Noel N.
Published: (2013)

Time dependency of strainrange partitioning life relationships /
by: Kalluri, Sreeramesh
Published: (1984)

Simplification of fatigue test requirements for damage tolerance of composite interstage launch vehicle hardware /
by: Nettles, A. T. (Alan T.)
Published: (2010)

A guide to axial-flow turbine off-design computer program AXOD2 /
by: Chen, Shu-cheng S.
Published: (2014)

Creep and rupture strength of an advanced CVD SiC fiber /
by: Goldsby, Jon C., et al.
Published: (1997)

Composite overwrapped pressure vessels : a primer /
by: McLaughlan, Pat B.
Published: (2011)

Rotor vortex filaments : living on the slipstream's edge /
by: Young, Larry A.
Published: (1997)

A viscoplastic model with application of LiF-22%CaF₂ hypereutectic salt /
by: Freed, Alan David
Published: (1990)

Microprobe evaluations of grain boundary segregation in KM4 and IN100 /
by: Gabb, Timothy Paul, 1958-, et al.
Published: (2001)

Microprobe evaluations of grain boundary segregation in KM4 and IN100 /
by: Gabb, T. P.
Published: (2001)

Influence of shear stiffness degradation on crack paths in uni-directional composite laminates /
by: Satyanarayana, Arunkumar, et al.
Published: (2017)

Impact testing of aluminum 2024 and titanium 6A1-4V for material model development /
by: Pereira, J. Michael
Published: (2013)

Thermomechanical behavior of plasma-sprayed ZrO₂-Y₂O₃ coatings influenced by plasticity, creep and oxidation /
Published: (1987)

Preliminary nonlinear structural analysis of advanced composite tow-steered shells with large geometric imperfections /
by: Dobrin, Calvin P., et al.
Published: (2019)

Thermoviscoplastic response of Ti-15-3 under various loading conditions /
by: Tuttle, M. E.
Published: (1991)

A creep model for metallic composites based on matrix testing : application to Kanthal composites /
Published: (1990)

Hazards analysis and failure modes and effects criticality analysis (FMECA) of four concept vehicle propulsion systems /
by: Darmstadt, Patrick R.
Published: (2019)

Tensile and creep property characterization of potential Brayton cycle impeller and duct materials /
by: Gabb, Timothy P.
Published: (2006)

Independent effects of Reynolds number and Mach number on aerodynamics of an iced swept wing /
by: Broeren, Andy P.
Published: (2019)

Performance of a high-work, low-aspect-ratio turbine tested with a realistic inlet radial temperature profile /
by: Stabe, Roy G.
Published: (1984)

Axial and torsional fatigue behavior of Waspaloy /
by: Zamrik, S. Y., 1932-
Published: (1986)

Strain rate dependent deformation and strength modeling of a polymer matrix composite utilizing a micromechanics approach /
by: Goldberg, Robert K.
Published: (1999)

Derivation of the data reduction equations for the calibration of the six-component thrust stand in the CE-22 advanced nozzle test facility /
by: Wong, Kin C.
Published: (2003)

Structural benchmark creep testing for Microcast MarM-247 advanced Stirling converter E2 heater head test article SN18 /
by: Krause, David L., et al.
Published: (2013)

Tungsten fiber reinforced copper matrix composites : a review /
by: McDanels, David L.
Published: (1989)

A sensitivity study of commercial aircraft engine response for emergency situations /
Published: (2011)

Frequency of specific categories of aviation accidents and incidents during 2001-2010 /
by: Evans, Joni K.
Published: (2014)

The evaluation of the OSGLR algorithm for restructurable control /
Published: (1986)

An Approximate solution and master curves for buckling of symmetrically laminated composite cylinders /
by: Nemeth, Michael P.
Published: (2013)

Scaling of lift degradation due to anti-icing fluids based upon the aerodynamic acceptance test /
by: Broeren, Andy P., et al.
Published: (2012)

Sources of variation in creep testing /
by: Loewenthal, William S.
Published: (2011)