Examination of failure of printing plate, no. 29812 /

Theory of plates and shells /
by: Timoshenko, Stephen, 1878-1972
Published: (1959)

Stresses in plates and shells /
by: Ugural, A. C.
Published: (1999)

Stresses in plates and shells /
by: Ugural, A. C.
Published: (1981)

Stresses in beams, plates, and shells /
by: Ugural, A. C.
Published: (2009)

Einflussfelder orthogonal anisotroper Platten. : Influence surfaces of orthogonal anisotropic plates /
by: Krug, Siegfried
Published: (1961)

Measurement of thickness of chromium on currency printing plates : technical report - January 1 to June 30, 1970 /
by: Ogburn, Fielding
Published: (1970)

Local loads in plates and shells /
by: ukasiewicz, Stanisaw, doc. dr. hab. inz
Published: (1979)

Stress concentration factors for reinforced rounded-square holes in sheets /
by: Sobey, Albert J.
Published: (1968)

The accuracy of stress concentration estimation by finite element method in plates with cutouts and notches /
by: Guo, Chengxi
Published: (1994)

Cylindrical shells ; application of the theory of elasticity and the theory of rupture to the design of cylindrical roofs, tanks, tubes, pipe lines, and other thin-walled cylindrical structures.
by: Lundgren, Helge, 1914-
Published: (1949)

Stress concentration around holes /
by: Savin, G. N.
Published: (1961)

Kont︠s︡entrat︠s︡ii︠a︡ napri︠a︡zheniĭ okolo otverstiĭ.
by: Savin, Guriĭ Nikolaevich
Published: (1951)

Failures in wire baskets of ureteral stone dislodgers /
by: Christ, B. W.
Published: (1969)

Large deflections of structures with small elastic strains /
by: Im, Seyoung
Published: (1985)

The elastic-plastic analysis of a thin profiled annular disk considering work hardening and an incremental plastic strain-sress relation /
by: Traexler, John Frank
Published: (1965)

Plates and shells : theory and analysis /
by: Ugural, A. C.
Published: (2017)

Gross panel strength under combined loading /
by: Mansour, Alaa E.
Published: (1977)

Analysis of curved folded plate structures /
by: Meyer, Cl
Published: (1970)

Examination of electroformed nickel printing plate samples J-1, J-2, 695-B and 695-T /
by: Feinberg, I. J.
Published: (1969)

Studies of compressive stress distribution in simply reinforced concrete near the point of failure /
by: Herr, Lester A.
Published: (1951)

The effect of a stiffener on the maximum load of flat plywood plates in edgewise compression, with the face grain at 0° and 90° to the load, a single stiffener parallel to the direction of loading : load edges clamped, others simply supported /
by: Ringelstetter, L. A., et al.
Published: (1959)

Examination of M513/M514 fuse sleeves /
by: Hicho, G. E.
Published: (1969)

Prevention of the failure of metals under repeated stress : a handbook prepared for the Bureau of aeronautics, Navy department, by the staff of Battelle memorial institute, under the auspices of the National research council of the National academy of sciences.
Published: (1941)

A study of linearly viscoelastic, anisotropic shell structures /
by: Haile, William Buckner
Published: (1967)

An experimental investigation of frangible plate fragmentation /
by: Liber, Theodore
Published: (1966)

Izmerenie naprai︠a︡zheniĭ i usiliĭ v detali︠a︡kh mashin : sbornik rabot /
by: Prigorovskiĭ, N. I.
Published: (1955)

Examination of service and stress data of three ships for development of hull girder load criteria /
by: Dalzell, J. F.
Published: (1979)

Moisture and temperature effects on curvature of anti-symmetric cross-ply graphite/epoxy laminates /
by: Lott, Randall Stephen, 1950-
Published: (1980)

Photomechanical determination of stresses in the neighbourhood of loaded holes in anisotropic media /
by: Wilkinson, T. L.
Published: (1981)

Experimental stress analysis: principles and methods /
by: Holister, G. S.
Published: (1967)

The energy absorption capabilities of plain concrete under dynamic and static loadings.
by: Atchley, Billy Lee
Published: (1966)

Evolution of allowable stresses in shear for lumber /
Published: (1979)

Evaluation of nonlinear resilient moduli of unbound granular materials from accelerated traffic test data /
by: Chou, Yu-Tang
Published: (1976)

Methods and practice for stress and strain measurement.
Published: (1977)

Concrete quality assurance using accelerated strength testing /
by: Ragan, Steven A.
Published: (1984)

Stress invariants and mechanical testing of pavement materials /
by: Thrower, E. N.
Published: (1978)