Field test of Hylag underground pipe insulation at Philadelphia Navy Yard /

Effect of boiling of the insulation in underground heat distribution systems /
by: Cole, Selden D.
Published: (1962)

"You can estimate the value of pipe insulation" /
by: Rippen, A. L.
Published: (1978)

Marine pipe covering /
by: Godwin, W. W.
Published: (1942)

The calculation of heat loss from steam pipes. : The economic thickness of insulation.
by: Buckley, Harold, 1915-
Published: (1946)

Undetected installation errors in main steam line pipe tunnel differential temperature-sensing elements at boiling water reactors.
Published: (1989)

Application of super 9 Cr steel large diameter and thick wall pipes /
Published: (1988)

Non-destructive and failure evaluation of tubing from a retired steam generator /
Published: (2007)

Pressure vessel and piping design ; collected papers.
Published: (1960)

Piping handbook /
Published: (2000)

American standard code for pressure piping ; power, gas and air, oil, district heating, refrigeration, fabrication details, materials /
Published: (1942)

Controlling two-phase flow through pipe junctions /
by: Thonsgaard, Jonathan Eric, 1963-
Published: (1989)

Industrialʹnyĭ sposob teploizoli︠a︡t︠s︡ii truboprovodov minetalʹnoĭ vatoĭ /
by: Grushman, Roman Petrovich
Published: (1956)

Underground insulated piping systems : excluding walk-in tunnels /
Published: (1963)

Loading tests on buried flexible pipes to validate a new design model /
by: Crabb, G. I.
Published: (1985)

Impact tests on pipes buried under roads.
by: Page, J.
Published: (1966)

Potential inconsistency in the assessment of the radiological consequences of a main steam line break associated with the implementation of steam generator tube voltage-based repair criteria.
Published: (1997)

ASTM recommended dimensional standards for prefabrication and field fabrication of thermal insulating fitting covers for NPS piping, vessel lagging, and dished head segments.
Published: (1976)

Detection and monitoring of sudden and/or rapidly increasing primary-to-secondary leakage.
Published: (1988)

Degradation of steam generator internals.
Published: (1997)

Supplemental information to Generic Letter 95-03 "Circumferential cracking of steam generator tubes".
Published: (1995)

Piping calculations manual /
by: Menon, E. Shashi
Published: (2014)

Corrosion-under-insulation (CUI) guidelines /
Published: (2008)

Steam generator feedwater distribution piping damage.
Published: (1991)

Pipe stress engineering /
by: Peng, Liang-Chuan
Published: (2009)

Dynamic testing of slotted underdrain pipe /
by: Bush, A. J. (Albert Jasper)
Published: (1979)

Steam generator tube integrity issues : pressurization rate effects, failure maps, leak rate correlation models, and leak rates in restricted areas /
Published: (2009)

Tube leakage due to a fabrication flaw in a replacement steam generator.
Published: (2004)

Steam generator tube integrity and associated technical specifications.
Published: (2006)

Resolution of Generic Safety Issue 188 : steam generator tube leaks or ruptures concurrent with containment bypass from main steam line or feedwater line breaches /
by: Reichelt, E.
Published: (2009)

Steam generator tube inspection techniques.
Published: (1997)

A test to determine the bending moment resistance of rigid pipes /
by: Brennan, Guy
Published: (1978)

Development of techniques for improving downhole inspection of steel pipe casing /
by: Wilson, G. H.
Published: (1977)

Loading tests on an Armco pipe arch culvert /
by: Temporal, J.
Published: (1985)

Boiling tests of insulation for underground heat distribution systems : an interim report /
by: Cole, Selden D.
Published: (1958)

HDPE pipe : recommended material specifications and design requirements /
by: Hsuan, Y. G. (Yick Grace), 1956-
Published: (1999)

Corrosion-under-insulation (CUI) guidelines /
Published: (2016)