Implementation of J-A methodology elastic-plastic crack instability analysis capability into the WARP-3D code /

Influence of shear stiffness degradation on crack paths in uni-directional composite laminates /
by: Satyanarayana, Arunkumar, et al.
Published: (2017)

The development of directional decohesion finite elements for multiscale failure analysis of metallic polycrystals /
by: Saether, Erik
Published: (2009)

Measuring crack length in coarse grain ceramics /
by: Salem, Jonathan A.
Published: (2010)

Analytical round robin for elastic-plastic analysis of surface cracked plates : phase I results /
by: Wells, D. N.
Published: (2012)

Analytical round robin for elastic-plastic analysis of surface cracked plates : phase II results /
by: Allen, P. A., et al.
Published: (2017)

Elastic-plastic J-integral solutions for surface cracks in tension using an interpolation methodology /
by: Allen, P. A., et al.
Published: (2013)

Corrosion fatigue crack propagation in metals /
by: Gangloff, R. P.
Published: (1990)

Relating cohesive zone model to linear elastic fracture mechanics /
by: Wang, John T.
Published: (2010)

Investigation of a Moiré based crack detection technique for propulsion health monitoring /
Published: (2012)

Analysis of interlaminar fracture in composites under combined loading : semi-annual report /
by: Armanios, Erian A.
Published: (1989)

Application of benchmark examples to assess the single and mixed-mode static delamination propagation capabilities in ANSYS® /
by: Kreuger, Ronald
Published: (2012)

Numerical simulation of delamination growth in composite materials /
by: Camanho, P. P.
Published: (2001)

Advances in fatigue and fracture mechanics analyses for metallic aircraft structures /
by: Newman, J. C.
Published: (2000)

Variables controlling fatigue crack growth of short cracks /
by: Telesman, Jack
Published: (1986)

The effects of crack surface friction and roughness on crack tip stress fields /
by: Ballarini, Robert
Published: (1987)

Comparison of two computer codes for crack growth analysis : NASCRAC versus NASA/FLAGRO /
by: Stallworth, R.
Published: (1989)

Plastics failure : analysis and prevention /
Published: (2001)

Effect of crack curvature on stress intensity factors for ASTM standard compact tension specimens /
by: Alam, Javed, et al.
Published: (1983)

Fracture behavior of a stitched warp-knit carbon fabric composite /
by: Poe, C. C.
Published: (2001)

Influence of finite element software on energy release rates computed using the virtual crack closure technique /
by: Krueger, Ronald
Published: (2006)

Method for estimating crack-extension resistance curve from residual-strength data /
by: Orange, Thomas W.
Published: (1980)

Thermomechanical crack growth using boundary elements /
by: Prasad, N. N. V.
Published: (1998)

Final report on the SRB frustrum "Smiley" cracking phenomenon study /
by: Cruse, Thomas A.
Published: (1993)

Optical strain and crack-detection measurements on a rotating disk /
by: Woike, Mark R.
Published: (2013)

Modeling progressive damage using local displacement discontinuities within the FEAMAC multiscale modeling framework /
by: Ranatunga, Vipul
Published: (2010)

Observation of intralaminar cracking in the edge crack torsion specimen /
by: Czabaj, Michael W., et al.
Published: (2013)

Floating node method and virtual crack closure technique for modeling matrix cracking-delamination interaction /
by: De Carvalho, N. V.
Published: (2013)

Controlled crack growth specimen for brittle systems /
by: Calomino, Anthony M.
Published: (1990)

Stress-intensity factor equations for cracks in three-dimensional finite bodies subjected to tension and bending loads /
by: Newman, J. C., et al.
Published: (1984)

An evaluation of the plasticity-induced crack-closure concept and measurement methods /
by: Newman, J. C.
Published: (1998)

Effect of boron on intergranular hot cracking of Ni-Cr-Fe superalloys containing niobium /
by: Thompson, R. G.
Published: (1990)

Combined effect of matrix cracking and stress-free edge on delamination /
by: Salpekar, Satish A. (Satish Annaji), 1954-
Published: (1990)

Cyclic crack growth testing of an A.O. Smith multilayer pressure vessel with modal acoustic emission monitoring and data assessment /
by: Ziola, Steven M.
Published: (2014)

Development and application of benchmark examples for mixed-mode I/II quasi-static delamination propagation predictions /
by: Krueger, Ronald
Published: (2012)

Fracture toughness and crack growth of Zerodur /
by: Viens, Michael J.
Published: (1990)

An evaluation of the pressure proof test concept for thin sheet 2024-T3 /
Published: (1990)