Effect of crack curvature on stress intensity factors for ASTM standard compact tension specimens /

A back face strain compliance expression for the compact tension specimen /
by: Riddell, William T., et al.
Published: (1998)

Fatigue-life prediction methodology using small-crack theory /
by: Newman, J. C., et al.
Published: (1997)

Back-face strain for monitoring stable crack extension in precracked flexure specimens /
by: Salem, J. A. (Jonathan A.), 1960-
Published: (2010)

Through-the-thickness fatigue crack closure behavior in an aluminum alloy /
by: Dawicke, D. S.
Published: (1990)

Corrosion fatigue crack propagation in metals /
by: Gangloff, R. P.
Published: (1990)

Methodology for predicting the onset of widespread fatigue damage in lap-splice joints /
by: Newman, J. C.
Published: (1998)

Stress-intensity factor equations for cracks in three-dimensional finite bodies subjected to tension and bending loads /
by: Newman, J. C., et al.
Published: (1984)

Advances in fatigue and fracture mechanics analyses for metallic aircraft structures /
by: Newman, J. C.
Published: (2000)

Influence of shear stiffness degradation on crack paths in uni-directional composite laminates /
by: Satyanarayana, Arunkumar, et al.
Published: (2017)

Fatigue crack growth in unidirectional metal matrix composite /
by: Ghosn, Louis J.
Published: (1990)

Stress-intensity factor equations for cracks in three-dimensional finite bodies subjected to tension and bending loads /
by: Newman, J. C.
Published: (1984)

Mitigation of crack damage in metallic materials /
by: Leser, Patrick E.
Published: (2014)

Measuring crack length in coarse grain ceramics /
by: Salem, Jonathan A.
Published: (2010)

Modeling of crack bridging in a unidirectional metal matrix composite /
by: Ghosn, Louis J.
Published: (1991)

Implementation of J-A methodology elastic-plastic crack instability analysis capability into the WARP-3D code /
by: Hamm, Kenneth R.
Published: (2018)

The development of directional decohesion finite elements for multiscale failure analysis of metallic polycrystals /
by: Saether, Erik
Published: (2009)

An experimental study of fatigue crack growth in aluminum sheet subjected to combined bending and membrane stresses /
by: Phillips, Edward P.
Published: (1997)

Fatigue crack growth under general-yielding cyclic-loading /
by: Minzhong, Zheng
Published: (1986)

Influence of finite element software on energy release rates computed using the virtual crack closure technique /
by: Krueger, Ronald
Published: (2006)

Plates and shells containing a surface crack under general loading conditions /
by: Joseph, Paul F., 1958-
Published: (1987)

Results of the round robin on opening-load measurement : conducted by ASTM Task Group E24.04.04 on crack closure measurement and analysis /
by: Phillips, Edward P.
Published: (1989)

Combined effect of matrix cracking and stress-free edge on delamination /
by: Salpekar, Satish A. (Satish Annaji), 1954-
Published: (1990)

Resin selection criteria for "tough" composite structures /
by: Chamis, C. C. (Christos C.), et al.
Published: (1983)

The effect of O₂, H₂O, and N₂ on the fatigue crack growth behavior of an α + β titanium alloy at 24C̊ and 177C̊ /
by: Smith, Stephen W.
Published: (2001)

Characteristics of fatigue crack initiation and propagation in Ti-6Al-4V with electrical potential drop technique /
by: Kalluri, Sreeramesh
Published: (1988)

Characterization of fatigue crack initiation and propagation in Ti-6Al-4V with electrical potential drop technique /
by: Kalluri, Sreeramesh
Published: (1988)

An evaluation of the plasticity-induced crack-closure concept and measurement methods /
by: Newman, J. C.
Published: (1998)

Fatigue crack growth in a unidirectional SCS-6/Ti-15-3 composite /
by: Kantzos, Peter
Published: (1990)

Factors influencing dwell fatigue cracking in notches of powder metallurgy superalloys /
Published: (2011)

Grain boundary oxidation and oxidation accelerated fatigue crack nucleation and propagation /
by: Liu, H. W. (Hao Wen), 1926-
Published: (1986)

Fatigue life methodology for bonded composite skin/stringer configurations /
Published: (2001)

Controlled crack growth specimen for brittle systems /
by: Calomino, Anthony M.
Published: (1990)

The surface crack problem in an orthotropic plate under bending and tension /
by: Wu, Bing-Hua
Published: (1986)

The surface crack problem in an orthotropic plate under bending and tension /
by: Wu, Bing-Hua
Published: (1986)

Effects of aqueous solutions on slow crack growth of soda-lime-silicate glass /
by: Hausmann, Bronson D., et al.
Published: (2016)

A comparison of the capability of sensitivity level 3 and sensitivity level 4 fluorescent penetrants to detect fatigue cracks in various metals /
by: Parker, Bradford H.
Published: (2011)