Stability of rectangular plates with longitudinal or transverse stiffeners under uniform compression.
| Corporate Author: | United States. National Advisory Committee for Aeronautics |
|---|---|
| Format: | Government Document eBook |
| Language: | English |
| Published: |
[Washington] :
[s.n.],
1939.
|
| Subjects: | |
| Online Access: | Electronic resource (PDF) |
Similar Items
Effect of masses of controls on longitudinal stability with free elevator.
Published: (1939)
Published: (1939)
Limit of stability of curved plate strip under shear and axial stresses.
Published: (1939)
Published: (1939)
Wind℗--tunnel investigation of effect of yaw on lateral℗--stability characteristics, II--Rectangular N. A. C. A. 23012 wing with a circular fuselage and fin.
Published: (1939)
Published: (1939)
Local instability of symmetrical rectangular tubes under axial compression.
Published: (1939)
Published: (1939)
Flight comparison of conventional ailerons on rectangular wing and of conventional and floating wing℗--tip ailerons on tapered wing.
Published: (1937)
Published: (1937)
Charts for checking the stability of compression members in trusses.
Published: (1936)
Published: (1936)
The effects of partial℗--span slotted flaps on aerodynamic characteristics of a rectangular and a tapered N. A. C. A. 23012 wing.
Published: (1939)
Published: (1939)
Lift distribution of wings with end plates.
Published: (1938)
Published: (1938)
Effect of compressibility on pressure reading of Prandtl pitot tube at subsonic flow velocity.
Published: (1939)
Published: (1939)
Calculation of load distribution in stiffened cylindrical shells.
Published: (1938)
Published: (1938)
Load tests on stiffened circular cylindrical shell.
Published: (1938)
Published: (1938)
Effect of compressibility on 8 full-scale propellers operating in take℗--off and climbing range.
Published: (1938)
Published: (1938)
Flight measurements of dynamic longitudinal stability of several airplanes and correlation of measurements with pilots' observations of handling characteristics.
Published: (1936)
Published: (1936)
Lateral instability of deep rectangular beams.
Published: (1937)
Published: (1937)
Stability of castering wheels for aircraft landing gears.
Published: (1940)
Published: (1940)
Charts for checking the stability of plane systems of rods.
Published: (1937)
Published: (1937)
Model experiments on forces and moments acting on end plate fitted to wing.
Published: (1938)
Published: (1938)
Static longitudinal stability and longitudinal control of autogiro rotors.
Published: (1938)
Published: (1938)
An analysis of longitudinal stability in power-off flight with charts for use in design.
Published: (1935)
Published: (1935)
Longitudinal stability in relation to use of automatic pilot.
Published: (1938)
Published: (1938)
Theoretical stability and control characteristics of wings with various amounts of taper and twist.
Published: (1938)
Published: (1938)
Preliminary investigation of boundary℗--layer transition along flat plate with adverse pressure gradient.
Published: (1938)
Published: (1938)
Chart for Critical Compressive Stress of Flat Rectangular Planes, Aug. 1940.
Published: (1940)
Published: (1940)
Loads imposed on intermediate frames of stiffened shells.
Published: (1939)
Published: (1939)
An investigation of sheet-stiffener panels subjected to compression loads with particular reference to torsionally weak stiffeners.
Published: (1940)
Published: (1940)
Wind℗--tunnel investigation of effect of yaw on lateral-stability characteristics : 1, Four N. A. C. A. 23012 wings of various plan forms with and without dihedral.
Published: (1939)
Published: (1939)
Behavior of plate strip under shear and compressive stresses beyond buckling limit.
Published: (1938)
Published: (1938)
Investigations on the amount of downwash behind rectangular and elliptical wings.
Published: (1936)
Published: (1936)
Statics of Circular Stiffeners for Monocoque Fuselages.
Published: (1942)
Published: (1942)
General considerations on the flow of compressible fluids.
Published: (1936)
Published: (1936)
Compression struts with nonprogressively variable moment of inertia.
Published: (1938)
Published: (1938)
Tank tests of models of flying boat hulls having longitudinal steps.
Published: (1936)
Published: (1936)
A simplified method for the calculation of airfoil pressure distribution.
Published: (1939)
Published: (1939)
Pressure℗--distribution investigation of an N. A. C. A. 0009 airfoil with 50-percent-chord plain flap and three tabs.
Published: (1939)
Published: (1939)
An approximate spin design criterion for monoplanes.
Published: (1939)
Published: (1939)
Tests of N. A. C. A. 23012 airfoil with slotted deflector flap.
Published: (1939)
Published: (1939)
Wind-tunnel investigation of ground effect on wings with flaps.
Published: (1939)
Published: (1939)
Measurement of the air-flow velocity in the cylinder of an airplane engine.
Published: (1939)
Published: (1939)
Tank tests to determine the effects of the chine flare of a flying-boat hull, N. A. C. A. model series 62 and 69.
Published: (1939)
Published: (1939)
Propeller tests to determine the effect of number of blades at two typical solidities.
Published: (1939)
Published: (1939)