Torsion and buckling of open sections.

Effective width of thin plywood plates at maximum load in compression with the face grain at 0°, 15°, 30°, 45°, 60°, 75°, and 90° to load /
by: Norris, C. B. (Charles Brazer), 1894-, et al.
Published: (1962)

So you want to design aircraft : manufacturing with composites /
by: Broge, Jean
Published: (2018)

New materials for next-generation commercial transports /
Published: (1996)

Critical combinations of torsion and direct axial stress for thin-walled cylinders /
by: Batdorf, S. B.
Published: (1947)

Compressive buckling of simply supported curved plates and cylinders of sandwich construction /
by: Stein, Manuel
Published: (1952)

Materials research agenda for the automotive and aircraft industries : report /
Published: (1993)

The effect of internal pressure on the buckling stress of thin-walled circular cylinders under torsion /
by: Crate, Harold, et al.
Published: (1944)

A Unified theory of plastic buckling of columns and plates /
by: Stowell, Elbridge Z.
Published: (1948)

Care and repair of advanced composites /
by: Armstrong, Keith B.
Published: (2005)

Plastic buckling of simply supported compressed plates /
by: Pride, Richard A., et al.
Published: (1949)

Make your own belts and buckles /
by: Roberson, Nena, et al.
Published: (1956)

Charts for calculation of the critical compressive stress for local instability of idealized web- and T-stiffened panels /
by: Boughan, Rolla B.
Published: (1944)

Buckling of thin-walled cylinder under axial compression and internal pressure /
by: Lo, Hsu
Published: (1950)

The buckling of curved tension-field girders.
Published: (1938)

Principles of moment distribution applied to stability of structures composed of bars or plates /
by: Lundquist, Eugene E.
Published: (1948)

Twisting failure of centrally loaded open-section columns in elastic range.
Published: (1938)

Handbook of structural stability.
by: Becker, Herbert, 1918-
Published: (1958)

Handbook of structural stability.
by: Gerard, George
Published: (1957)

Flexural-torsional buckling of structures /
by: Trahair, N. S.
Published: (1993)

Ultimate strength of a ship's hull girder plastic and buckling mode /
by: Mansour, A. E.
Published: (1980)

Experimental study of deformation and of effective width in axially loaded sheet-stringer panels /
by: Ramberg, Walter
Published: (1939)

Flexural-Torsional Buckling of Structures /
by: Trahair, N. S.
Published: (2017)

Effect of normal pressure on the critical compressive and shear stress of curved sheet /
by: Rafel, Norman
Published: (1945)

Effect of transition in cross-sectional shape on development of velocity and pressure distribution of turbulent flow in pipes.
Published: (1939)

Open Pit Mine Planning and Design, Two Volume Set & CD-ROM Pack, Third Edition, 3rd Edition /
by: Hustrulid, William, et al.
Published: (2013)

A Method of calculating the compressive strength of Z-stiffened panels that develop local instability /
by: Gallaher, George L.
Published: (1947)

Critical combinations of shear and direct axial stress for curved rectangular panels /
by: Schildcrout, Murry
Published: (1949)

The stability under longitudinal compression of flat symmetric corrugated-core sandwich plates with simply supported loaded edges and simply supported or clamped unloaded edges /
by: Seide, Paul
Published: (1952)

Tables of stiffness and carry-over factor for flat rectangular plates under compression /
by: Kroll, W. D.
Published: (1943)

Critical combinations of shear and longitudinal direct stress for long plates with transverse curvature /
by: Batdorf, S. B., et al.
Published: (1947)

Bending of beams of thin sections.
Published: (1936)

Torsion tests of tubes.
Published: (1937)

Charts for checking the stability of compression members in trusses.
Published: (1936)

Empirical corrections to the span load distribution at the tip.
Published: (1937)

Lateral instability of deep rectangular beams.
Published: (1937)

Investigation of ignition and combustion processes of Diesel engines operating with turbulence and air℗--storage chambers [aircraft].
Published: (1938)