Cover Image

Measurements of fuel distribution within sprays for fuel-injection engines.

Bibliographic Details
Corporate Author:	United States. National Advisory Committee for Aeronautics
Format:	Government Document eBook
Language:	English
Published:	[Washington] : [s.n.], 1936.
Subjects:	Engines. Aeronautics > Research. Airplanes. Fuel.
Online Access:	Electronic resource (PDF)

Similar Items

Effect of moderate air flow on distribution of fuel sprays after injection cut-off.
Published: (1934)

Effects of air-fuel ratio on fuel spray and flame formation in compression-ignition engine.
Published: (1935)

Knocking characteristics of fuels in relation to maximum permissible performance of aircraft engines.
Published: (1938)

Heat transfer to fuel sprays injected into heated gases.
Published: (1936)

Penetration and duration of fuel sprays from pump injection system.
Published: (1931)

Performance of Fuel-Injection Spark-Ignition Engine Using Hydrogenated Safety Fuel.
Published: (1933)

Photomicrographic studies of fuel sprays.
Published: (1933)

Distribution and regularity of injection from multicylinder fuel-injection pump.
Published: (1935)

Comparative performance of engines using carburetor, manifold injection, and cylinder injection.
Published: (1939)

The quiescent-chamber type compression-ignition engine.
Published: (1936)

Effect of nozzle design on fuel spray and flame formation in a high-speed compression℗--ignition engine.
Published: (1936)

Compression-ignition engine performance with undoped and doped fuel oils and alcohol mixtures.
Published: (1939)

Effect of air℗--fuel ratio on detonation in gasoline engines.
Published: (1938)

Effect of viscosity on fuel leakage between lapped plungers and sleeves and on discharge from pump-injection system.
Published: (1933)

Influence of fuel-oil temperature on combustion in pre-chamber compression-ignition engine.
Published: (1936)

Combustion in bomb with fuel-injection system [analysis of test results].
Published: (1935)

A comparison of fuel sprays from several types of injection nozzles.
Published: (1934)

Some effects of injection advance angle, engine℗--jacket temperature, and speed on combustion in compression-ignition engine.
Published: (1935)

Detailed mock-up information; Stromberg injection carburetor.
Published: (1945)

Engine performance and knock rating of fuels for high℗-out-put aircraft engines.
Published: (1938)

Discharge characteristics of simulated unit injection system.
Published: (1938)

Ignition and flame development in the case of diesel fuel injection.
Published: (1936)

Further studies of flame movement and pressure development in engine cylinder.
Published: (1936)

Fuel consumption of carburetor engine at various speeds and torques.
Published: (1938)

Motor fuel situation.
Published: (1927)

Fuel and power in Latin America.
Published: (1931)

Activation of hydrocarbons and octane number.
Published: (1939)

Theoretical and experimental study of ignition lag and engine knock.
Published: (1939)

Photographic study of combustion and knock in spark℗--ignition engine.
Published: (1937)

The cetene scale and the induction period preceding the spontaneous ignition of diesel fuels in bombs.
Published: (1936)

The horsepower of aircraft engines and their maximum frontal area.
Published: (1936)

Forces and moments on airplane engine mounts.
Published: (1936)

Design of N.A.C.A. cowlings for radial air℗--cooled engines.
Published: (1938)

Interrelation of exhaust-gas constituents.
Published: (1937)

Engines and propellers for powered gliders and light airplanes.
Published: (1938)

Heat transfer from cylinders having closely spaced fins.
Published: (1937)

The design of airplane-engine superchargers.
Published: (1937)

Research and design problems introduced by increased power output.
Published: (1937)

Way to increased airplane engine power.
Published: (1939)

Description and test results of spark-ignition and compression℗--ignition 2-stroke-cycle engine.
Published: (1934)