Cover Image

Thermal output of WK-type strain gauges on various materials at cryogenic and elevated temperatures /

Bibliographic Details
Main Authors:	Kowalkowski, Matthew K. (Author), Rivers, H. Kevin (Author), Smith, Russell W. (Author)
Format:	Government Document eBook
Language:	English
Published:	Hampton, Virginia : National Aeronautics and Space Administration, Langley Research Center, October 1998.
Series:	NASA technical memorandum ; 1998-208739.
Subjects:	Aluminum-lithium alloys. Bismaleimide. Cryogenic temperature. Fiber composites. Graphite-epoxy composites. Lithium alloys. Ply orientation. Resin matrix composites. Strain gages. Titanium alloys.
Online Access:	https://purl.fdlp.gov/GPO/gpo83678

Similar Items

Microstructure-property relationships in Al-Cu-Li-Ag-Mg Weldalite [superscript TM] alloys /
by: Langan, T. J., et al.
Published: (1991)

The effect of resin toughness and modulus on compressive failure modes of quasi-isotropic graphite/epoxy laminates /
by: Sohi, Mohsen M.
Published: (1986)

Influence of thin-film adhesives in pullout tests between nickel-titanium shape memory alloy and carbon fiber-reinforced polymer matrix composites /
by: Quade, Derek J., et al.
Published: (2018)

Thermoviscoplastic response of Ti-15-3 under various loading conditions /
by: Tuttle, M. E.
Published: (1991)

Mode II interlaminar fracture toughness and fatigue characterization of a graphite epoxy composite material /
by: O'Brien, T. Kevin
Published: (2010)

Prediction of composite laminate fracture : micromechanics and progressive fracture /
by: Gotsis, Pascal K., et al.
Published: (1996)

Stacking-sequence optimization for buckling of laminated plates by integer programming /
by: Haftka, Raphael T.
Published: (1991)

Properties of two carbon composite materials using LTM25 epoxy resin /
by: Cross, John R., et al.
Published: (1996)

Fatigue debonding characterization in composite skin/stringer configurations /
by: Cvitkovich, Michael, et al.
Published: (1997)

Adjusting measured weight loss of aged graphite fabric/PMR-15 composites /
by: Bowles, Kenneth J.
Published: (1998)

High temperature fatigue behavior of tungsten copper composites /
by: Verrilli, Michael J.
Published: (1990)

Composite materials with uncured epoxy matrix exposed in stratosphere during NASA stratospheric balloon flight /
by: Kondyurin, A. V.
Published: (2013)

Recommended strain gage application procedures for various Langley Research Center balances and test articles /
by: Moore, Thomas C.
Published: (1997)

Characterization of Al-Cu-Li alloy 2090 near net shape extrusion /
by: Birt, M. J. (Matthew J.)
Published: (1998)

Pre-test analysis predictions for the shell buckling knockdown factor checkout tests, TA01 and TA02 /
by: Thornburgh, Robert P.
Published: (2011)

The effect of various quenchants on the hardness and microstructure of 60-NITINOL /
by: Thomas, Fransua
Published: (2015)

Delamination growth in composite materials /
Published: (1985)

Evaluation of Ti-48Al-2Cr-2Nb under fretting conditions /
Published: (2001)

Structure-property correlations in Al-Li alloy integrally stiffened extrusions /
by: Hales, Stephen J.
Published: (2001)

Material total mass loss in vacuum obtained from various outgassing systems /
by: Scialdone, John J.
Published: (2000)

Investigation of methods for selectively reinforcing aluminum and aluminum-lithium materials /
by: Bird, R. Keith
Published: (2013)

Probabilistic micromechanics and macromechanics for ceramic matrix composites /
by: Murthy, P. L. N., et al.
Published: (1997)

Oxide scales formed on NiTi and NiPtTi shape memory alloys /
Published: (2011)

Oxidation of continuous carbon fibers within a silicon carbide matrix under stressed and unstressed conditions /
by: Halbig, Michael C., 1946-
Published: (2000)

Three-dimensional cellular structures enhanced by shape memory alloys /
by: Nathal, Michael V.
Published: (2014)

Empirical study of the multiaxial, thermomechanical behavior of NiTiHf shape memory alloys /
by: Shukla, Dhwanil, et al.
Published: (2013)

Evaluation of pressurization fatigue life of 1441 Al-Li fuselage panel /
by: Bird, R. Keith, et al.
Published: (1999)

Evaluation of degradation inhibitors in poly(hexafluoropropene oxide) fluids /
by: Jones, William R., Jr
Published: (1996)

Evaluation of microcracking in two carbon-fiber/epoxy-matrix composite cryogenic tanks /
by: Hodge, A. J.

Resistivity of pristine and intercalated graphite fiber epoxy composites /
by: Gaier, James R.
Published: (1990)

Static and free-vibrational response of semi-circular graphite-epoxy frames with thin-walled open sections /
by: Collins, J. Scott
Published: (1989)

Study on effects of powder and flake chemistry and morphology on the properties of Al-Cu-Mg-X-X-X powder metallurgy advanced aluminum alloys /
Published: (1985)

Analysis of fiber clustering in composite materials using high-fidelity multiscale micromechanics /
by: Bednarcyk, Brett A., et al.
Published: (2015)

Static indentation load capacity of the superelastic 60NiTi for rolling element bearings /
by: DellaCorte, Christopher
Published: (2012)

Nickel-titanium alloys : corrosion "proof" alloys for space bearing, components and mechanism applications /
by: DellaCorte, Christopher
Published: (2010)

Low temperature creep of hot-extruded near-stoichiometric NiTi shape memory alloy /
by: Raj, Sai V., et al.
Published: (2013)

A resistance strain gage with repeatable and cancellable apparent strain for use to 800⁰ C /
by: Lei, Jih-Fen
Published: (1990)

Strong and tough Hi-Nicalon fiber-reinforced celsian matrix composites /
by: Bansal, Narottam P.
Published: (1997)

Advances in SiC/SiC composites for aero-propulsion /
by: DiCarlo, James A.
Published: (2013)

Fatigue damage in notched composite laminates under tension-tension cyclic loads /
Published: (1985)