Microstructural characterization of polymers by positron lifetime spectroscopy /

An improved compression molding technology for continuous fiber reinforced composite laminate : Part 1: AS-4/LaRC-TPI 1500 (HFG) prepreg system /
by: Hou, T. H.
Published: (1991)

Microstructure and properties of thermally sprayed functionally graded coatings for polymeric substrates /
Published: (2003)

A study of physical properties of ODPA-p-PDA polyimide films /
by: Singh, Jag J.
Published: (1990)

Lead removal from synthetic leachate matrices by a novel ion-exchange material /
by: Street, Kenneth W.
Published: (2002)

Lead removal from synthetic leachate matrices by a novel ion-exchange material /
by: Street, Kenneth W., et al.
Published: (2002)

Development of an impact- and solvent-resistant thermoplastic composite matrix, phase IV : final report /
by: Delano, C. B.
Published: (1987)

Cure cycle design methodology for fabricating reactive resin matrix fiber reinforced composites : a protocol for producing void-free quality laminates /
by: Hou, T. H.
Published: (2014)

Composite materials with uncured epoxy matrix exposed in stratosphere during NASA stratospheric balloon flight /
by: Kondyurin, A. V.
Published: (2013)

Investigation of paramagnetic response of metallic epoxies /
by: Ash, Robert L.
Published: (1986)

Copolyimides prepared from ODPA, BTDA, and 3,4-ODA /
Published: (1994)

Properties of two carbon composite materials using LTM25 epoxy resin /
by: Cross, John R., et al.
Published: (1996)

Analysis of fiber clustering in composite materials using high-fidelity multiscale micromechanics /
by: Bednarcyk, Brett A., et al.
Published: (2015)

Through-thickness tensile properties of triaxial braided composites /
by: Salem, J. A. (Jonathan A.), 1960-, et al.
Published: (2019)

The effect of impact damage next to holes on the bearing strength of carbon fiber laminates /
by: Nettles, A. T. (Alan T.)
Published: (2019)

Microstructural characterization of metal foams : an examination of the applicability of the theoretical models for modeling foams /
by: Raj, Sai V.
Published: (2011)

Combining through-thickness reinforcement and self-healing for improved damage tolerance and durability of composites /
by: O'Brien, T. Kevin
Published: (2013)

Microstructural characterization of metal foams : an examination of the applicability of the theoretical models for modeling foams /
by: Raj, S. V.
Published: (2010)

PMR polyimide compositions for improved performance at 371⁰C /
by: Vannucci, Raymond D.
Published: (1987)

Material property characterization of AS4/VRM-34 textile laminates /
by: Grenoble, Ray W., et al.
Published: (2013)

An assessment of self-healing fiber reinforced composites /
by: Smith, Joseph G.
Published: (2012)

The dependence of atomic oxygen undercutting of protected polyimide Kapton® H upon defect size /
by: Snyder, Aaron
Published: (2001)

A solvent resistant copolyimide /
Published: (1994)

Microstructural, chemical and mechanical characterization of polymer-derived Hi-Nicalon fibers with surface coatings /
by: Bansal, Narottam P., et al.
Published: (1998)

Improved compression molding technology for continuous fiber reinforced composite laminates : Part 2: AS-4/Polyimidesulfone prepreg system /
Published: (1991)

Rotational and translational effects in collisions of electronically excited diatomic hydrides /
by: Crosley, David R., 1941-
Published: (1988)

The effect of various quenchants on the hardness and microstructure of 60-NITINOL /
by: Thomas, Fransua
Published: (2015)

TP-H1148 knitline integrity evaluation : final report /
by: Gill, M.
Published: (1990)

A process for preparing an assembly of an article and a polyimide which resists dimensional change, delamination, and debonding when exposed to changes in temperature /
by: Stoakley, Diane M.
Published: (1991)

A direct process for preparing semi-crystalline polymides /
Published: (1994)

An investigation of stress dependent atomic oxygen erosion of Black Kapton observed on MISSE 6 /
by: Miller, Sharon K. R., et al.
Published: (2012)

Fatigue debonding characterization in composite skin/stringer configurations /
by: Cvitkovich, Michael, et al.
Published: (1997)

Thermal stability of the microstructure of an aged Nb-Zr-C alloy /
by: Uz, Mehmet, et al.
Published: (1990)

Cosmic ray positron research and silicon track detector development : final technical report /
by: Jones, W. V.
Published: (1990)

Notched strength allowables and inplane shear strength of AS4/VRM-34 textile laminates /
by: Grenoble, Ray W., et al.
Published: (2013)

Blast loading of epoxy panels using a shock tube /
by: Pankow, Mark
Published: (2010)

Delamination growth in composite materials /
Published: (1985)