Experimental investigation of roughness effects on transition onset and turbulent heating augmentation on a hemisphere at Mach 6 and Mach 10 /

An experimental investigation of the ground vortex created by a moving jet /
by: Stewart, V. R.
Published: (1989)

An experimental investigation of the ground vortex created by a moving jet /
by: Stewart, V. R.
Published: (1989)

The development of surface roughness and implications for cellular attachment in biomedical applications /
Published: (2001)

Effect of protuberance shape and orientation on Space Shuttle Orbiter boundary-layer transition /
by: King, Rudolph A.
Published: (2008)

Mach 5 to 7 RBCC propulsion system testing at NASA-LeRC HTF /
by: Perkins, H. Douglas, et al.
Published: (1996)

Quantitative global heat transfer in a Mach-6 quiet tunnel /
by: Sullivan, John P.
Published: (2012)

Validation of proposed metrics for two-body abrasion scratch test analysis standards /
by: Kobrick, Ryan L.
Published: (2011)

On the receptivity and non-parallel stability of traveling disturbances in rotating disk flow /
by: Balakumar, P.
Published: (1990)

Comparison of predicted and measured turbine vane rough surface heat transfer /
by: Boyle, Robert J., et al.
Published: (2000)

Secondary instability of stationary crossflow vortices in Mach 6 boundary layer over a circular cone /
by: Li, Fei
Published: (2015)

Evaluation of a technique to generate artificially thickened boundary layers in supersonic and hypersonic flows /
Published: (1991)

Mach 5 electroformed nickel nozzle refurbishment : FNAS investigation of ultra-smooth surfaces /
by: Rood, Robert, et al.
Published: (1992)

Measurement of the critical distance parameter against icing conditions on a NACA 0012 swept wing tip /
by: Vargas Meza, Mario
Published: (2011)

An evaluation of a SIRA image to determine forest density under conditions of moderate topographical variation : final report /
by: Smith, Milton
Published: (1985)

An evaluation of a SIRA image to determine forest density under conditions of moderate topographical variation : final report /
by: Smith, Milton
Published: (1985)

Design of a slotted, natural-laminar-flow airfoil for business-jet applications /
by: Somers, Dan M.
Published: (2012)

Flow unsteadiness effects on boundary layers /
by: Murthy, Sreedhara V.
Published: (1989)

The effect of interface roughness and oxide film thickness on the inelastic response of thermal barrier coatings to thermal cycling /
by: Pindera, M.-J. (Marek-Jerzy), 1951-, et al.
Published: (1999)

Evaluation of the low-speed stability and control characteristics of a Mach 5.5 Waverider concept /
by: Hahne, David E. (David Edgar)
Published: (1997)

An experimental investigation on location of boundary layer transition on the NACA 0012 using surface hot film gages /
by: Wang, Tie-cheng
Published: (1986)

Bearing elastohydrodynamic lubrication : a complex calculation made simple /
by: Zaretsky, Erwin V.
Published: (1990)

Aerodynamic classification of swept-wing ice accretion /
by: Broeren, Andy P., et al.
Published: (2013)

On the instability of hypersonic flow past a flat plate /
by: Blackaby, Nicholas
Published: (1990)

Determination of cross-sectional area of focused picosecond Gaussian laser beam /
by: Ledesma, Rodolfo
Published: (2018)

Rapid fabrication of flat plate cavity phosphor thermography test models for shuttle return-to-flight aero-heating /
Published: (2006)

Aerodynamic classification of swept-wing ice accretion /
by: Diebold, Jeff M., et al.
Published: (2013)

Mach 10 experimental database of a three-dimensional scramjet inlet flow field /
by: Holland, Scott D.
Published: (1995)

Fluctuating pressures measured beneath a high-temperature, turbulent boundary layer on a flat plate at a Mach number of 5 /
by: Parrott, Tony L.
Published: (1989)

Experimental study of boundary layer behavior in a simulated low pressure turbine /
by: Shyne, Rickey J.
Published: (1998)

HyBoLT flight experiment /
by: Chen, Fang-Jenq
Published: (2010)

Wind-tunnel measurements and comparison with flight of the boundary layer and heat transfer on a hollow cylinder at Mach 3 /
by: Stallings, Robert L., et al.
Published: (1980)

Investigation of materials for boundary layer control in a supersonic wind tunnel /
by: Braafladt, Alexander C., et al.
Published: (2013)

The mothball, sustainment, and proposed reactivation of the hypersonic tunnel facility (HTF) at NASA Glenn Research Center Plum Brook Station /
by: Thomas, Scott R.
Published: (2010)

Dwell time and surface parameter effects on removal of silicone oil from D6ac steel using TCA /
by: Boothe, R. E.
Published: (2003)

Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system /
by: Ghosn, Louis J.
Published: (2002)

Development of a high accuracy angular measurement system for Langley Research Center hypersonic wind tunnel facilities /
by: Newman, Brett
Published: (2003)