Formulas and calculations for drilling, production, and workover : all the formulas you need to solve drilling and production problems /
| Main Authors: | , , |
|---|---|
| Corporate Author: | |
| Other Authors: | |
| Format: | eBook |
| Language: | English |
| Published: |
Waltham, MA :
Gulf Professional Publishing, an imprint of Elsevier,
[2016]
|
| Edition: | Fourth edition. |
| Subjects: | |
| Online Access: | Connect to the full text of this electronic book |
Table of Contents:
- ""1.6. Pressure Gradient (psi/ft.), G (ppg) [USCS/British]""""1.7. Pressure Gradient G (SG) [SI-Metric]""; ""1.8. Mud Pump Output q (bbl/stk) and Q (gpm) [USCS/British]""; ""1.8.1. Triplex Pump""; ""1.8.2. Duplex Pump""; ""1.9. Hydraulic Horsepower""; ""1.10. Estimated Weight of Drill Collars in Air""; ""1.11. Open Hole and Tubular Capacity and Displacement Formulas""; ""1.11.1. Capacity of Open Hole or Tubulars""; ""1.11.2. Displacement of Tubulars""; ""1.11.3. Annular Capacity Between Casing or Hole and Drill Pipe, Tubing, or Casing""
- ""1.11.4. Annular Capacity Between Casing and Multiple Strings of Tubing""""1.12. Amount of Cuttings Drilled per Foot of Hole Drilled""; ""1.13. Annular Velocity (AV)""; ""1.13.1. Metric Calculations (m/min) and (m/s)""; ""1.13.2. SI Unit Calculations""; ""1.14. Pump Output Required in GPM for a Desired Annular Velocity, ft./min""; ""1.15. Pump Pressure/Pump Stroke Relationship (the Roughnecks Formula)""; ""1.15.1. Metric Calculation""; ""1.15.2. SI Unit Calculation""; ""1.16. Buoyancy Factor (BF)""; ""1.17. Formation Temperature (Tf)""; ""1.18. Temperature Conversion Formulas""
- ""Chapter 2: Rig Calculations""""2.1. Accumulator Capacity""; ""2.1.1. Useable Volume per Bottle""; ""2.1.2. Surface Application""; ""2.1.3. English Units""; ""2.1.4. Deepwater Applications""; ""2.1.5. Accumulator Precharge Pressure""; ""2.2. Slug Calculations""; ""2.2.1. Barrels of Slug Required for a Desired Length of Dry Pipe""; ""2.2.2. Weight of Slug Required for a Desired Length of Dry Pipe with a Set Volume of Slug""; ""2.2.3. Volume, Height, and Pressure Gained Because of Placement of Slug in Drill Pipe""; ""2.2.4. English Units Calculation""; ""2.2.5. SI Calculation""
- ""2.3. Bulk Density of Cutting Using the Mud Balance""""2.4. Drill String Design""; ""2.4.1. Estimated Weight of Drill Collars in Air""; ""2.4.2. Tensile Strength of Tubulars in lb (Ref.: API Spec 5D & 7)""; ""2.4.3. Calculate the Reduced Tensile Yield Strength in lb""; ""2.4.4. Calculate the Adjusted Weight of the Drill Pipe and Tool Joints in lb/ft""; ""2.4.5. Calculate the Length of BHA Necessary for a Desired Weight on the Bit""; ""2.4.6. Calculate the Maximum Length of Premium Drill Pipe That Can Be Run into the Hole with a Specific BHA Assemble Base...""