Cover Image

Some investigations of the general instability of stiffened metal cylinders. VIII. Stiffened metal cylinders subjected to pure torsion /

Bibliographic Details
Main Author:	Dunn, Louis (Louis Gerhardus), 1908-1979 (Author)
Format:	Government Document eBook
Language:	English
Published:	Washington : National Advisory Committee for Aeronautics, May 1947.
Series:	Technical note (United States. National Advisory Committee for Aeronautics) ; no. 1197.
Subjects:	Cylinders. Thin-walled structures. Reinforcing bars. Loads (Mechanics) Strains and stresses. Torsion.
Online Access:	https://purl.fdlp.gov/GPO/gpo124959 Connect to the full text of this electronic book

Similar Items

Some investigations of the general instability of stiffened metal cylinders.
by: Dunn, Louis (Louis Gerhardus), 1908-1979
Published: (1947)

Critical stress of thin-walled cylinders in torsion /
by: Batdorf, S. B.
Published: (1947)

Applied stress analyses of pressurized cylinders /
by: Little, R. E. (Robert Eugene), 1933-
Published: (1965)

Critical-stress of thin-walled cylinders in axial compression /
by: Batdorf, S. B., et al.
Published: (1947)

The buckling of a pressurised stiffened cylinder under axial load /
by: McKenzie, K. I.
Published: (1961)

Natural frequencies and strain distribution in a stiffened, thick cylindrical shell /
by: Patel, Jayantibhai Shivabhai
Published: (1967)

Critical combinations of torsion and direct axial stress for thin-walled cylinders /
by: Batdorf, S. B.
Published: (1947)

Local loads in plates and shells /
by: ukasiewicz, Stanisaw, doc. dr. hab. inz
Published: (1979)

Buckling of thin-walled cylinder under axial compression and internal pressure /
by: Lo, Hsu
Published: (1950)

The theory of thin walled bars /
by: Gjelsvik, Atle
Published: (1981)

Torsion of reinforced concrete /
by: Hsu, Thomas T. C. (Thomas Tseng Chuang), 1933-
Published: (1984)

Bearing capacity of plain and reinforced concrete walls.
by: Larsson, Lars Erik
Published: (1959)

Horizontal pressures on retaining walls due to concentrated surface loads /
by: Spangler, M. G. (Merlin Grant), 1894-1986
Published: (1938)

Bond between concrete and steel and the spacing of reinforcement /
by: Gilkey, Herbert James, 1890-
Published: (1956)

Methods of analysis and design of concrete boxbeams with side cantilevers /
by: Maisel, B. I.
Published: (1974)

Moving load on viscoelastic layered systems, phase II /
by: Elliott, John F. (John Frank), 1920-
Published: (1969)

Studies of compressive stress distribution in simply reinforced concrete near the point of failure /
by: Herr, Lester A.
Published: (1951)

Reinforced and prestressed concrete in torsion /
by: Cowan, Henry J.
Published: (1965)

A torque, tension, and stress corrosion evaluation of high strength A286 bolts /
by: Montano, J. W.
Published: (1986)

A torque, tension, and stress corrosion evaluation of high strength A286 bolts /
by: Montano, J. W.
Published: (1986)

Chevron-notched specimens : testing and stress analysis : a symposium /
Published: (1984)

Cracks in stiffening rings on 48-Inch-diameter UF6 cylinders.
Published: (1987)

Improving the distribution and reducing the magnitude of pavement damage /
Published: (1980)

Structural Load Determination : 2018 IBC and ASCE/SEI 7-16 /
by: Fanella, David A. (David Anthony)
Published: (2018)

Classical and advanced theories of thin structures : mechanical and mathematical aspects /
Published: (2008)

Effects of corrosion and fatigue on the load-carrying capacity of structural and reinforcing steel /
by: Hahin, Christopher
Published: (1994)

Stationary and propagative instabilities in metals : a computational point of view /
by: Wang, Wei Min, 1961-
Published: (1997)

A study of pavement strains and deflections produced by dynamic tire forces.
by: Engenes, Svein O.
Published: (1969)

Structural Load Determination : 2024 IBC and ASCE/SEI 7-22 /
by: Fanella, David A.
Published: (2024)

An experimental analysis of transient vehicle loads and response of flexible pavements : final report /
by: Sanborn, John L.
Published: (1965)

The effect of a stiffener on the maximum load of flat plywood plates in edgewise compression, with the face grain at 0° and 90° to the load, a single stiffener parallel to the direction of loading : load edges clamped, others simply supported /
by: Ringelstetter, L. A., et al.
Published: (1959)

Continuity in concrete building frames.
Published: (1951)

Instrumentation for measurement of axial load in drilled shafts /
by: Barker, Walter R.
Published: (1969)

A data acquisition and control program for axial-torsional fatigue testing /
by: Kalluri, Sreeramesh
Published: (1989)

A data acquisition and control program for axial-torsional fatigue testing /
by: Kalluri, Sreeramesh
Published: (1989)

Analysis of steel stress and concrete movement on an experimental continuously reinforced concrete pavement /
by: McCullough, B. Frank
Published: (1968)

Corrosion of metals in concrete.
Published: (1975)

Air and oil cylinders in industrial applications.
by: Heiser, Elmer F.
Published: (1954)

Retaining structures : proceedings of the conference Retaining structures organized by the Institution of Civil Engineers and held at Robinson COllege, Cambridge on 20-23 July 1992 ; edited by C.R.I. Clayton.
Published: (1993)

Steel concrete reinforcing bar from Belarus, China, Indonesia, Korea, Latvia, Moldova, Poland, and Ukraine : investigation nos. 731-TA-873-875, 877-880, and 882 (review).
Published: (2007)