Cover Image

Critical stress for an infinitely long flat plate with elastically restrained edges under combined shear and direct stress /

Bibliographic Details
Main Author:	Stowell, Elbridge Z.
Corporate Authors:	Knovel (Firm), United States. National Advisory Committee for Aeronautics, Langley Aeronautical Laboratory
Other Authors:	Schwartz, Edward B.
Format:	eBook
Language:	English
Published:	Washington, D.C. : National Advisory Committee for Aeronautics, [1943]
Series:	Wartime Reports (United States. National Advisory Committee for Aeronautics) ; no. L340.
Subjects:	Plates (Engineering) Shear (Mechanics) Buckling (Mechanics) Loads (Mechanics) Strains and stresses. Charts, diagrams, etc. Electronic books.
Online Access:	Connect to the full text of this electronic book

Similar Items

The effect of internal pressure on the buckling stress of thin-walled circular cylinders under torsion /
by: Crate, Harold, et al.
Published: (1944)

Critical combinations of shear and longitudinal direct stress for long plates with transverse curvature /
by: Batdorf, S. B., et al.
Published: (1947)

Critical combinations of shear and direct axial stress for curved rectangular panels /
by: Schildcrout, Murry
Published: (1949)

Effect of normal pressure on the critical compressive stress of curved sheet /
by: Rafel, Norman
Published: (1942)

Approximate stress analysis of multistringer beams with shear deformation of the flanges /
by: Kuhn, Paul
Published: (1938)

Charts for calculation of the critical compressive stress for local instability of idealized web- and T-stiffened panels /
by: Boughan, Rolla B.
Published: (1944)

Handbook of structural stability.
by: Gerard, George, et al.
Published: (1957)

Cumulative damage under reversed transverse shear superimposed upon static tension /
by: Nazari, Gholam Hossein
Published: (1977)

Tables of stiffness and carry-over factor for flat rectangular plates under compression /
by: Kroll, W. D.
Published: (1943)

A Method of calculating the compressive strength of Z-stiffened panels that develop local instability /
by: Gallaher, George L.
Published: (1947)

Charts for calculation of the critical stress for local instability of columns with I-, Z-, channel, and rectangular-tube section /
by: Kroll, W. D.
Published: (1943)

Effect of normal pressure on the critical compressive and shear stress of curved sheet /
by: Rafel, Norman
Published: (1945)

A summary of diagonal tension.
by: Kuhn, Paul
Published: (1952)

The stability under longitudinal compression of flat symmetric corrugated-core sandwich plates with simply supported loaded edges and simply supported or clamped unloaded edges /
by: Seide, Paul
Published: (1952)

The strength and stiffness of shear webs with and without lightening holes /
by: Kuhn, Paul
Published: (1942)

Ultimate strength of a ship's hull girder plastic and buckling mode /
by: Mansour, A. E.
Published: (1980)

Handbook of structural stability.
by: Gerard, George
Published: (1957)

Handbook of structural stability.
by: Gerard, George
Published: (1957)

Tension fields in originally curved, thin sheets during shearing stresses /
by: Wagner, H., et al.
Published: (1935)

Handbook of structural stability.
by: Becker, Herbert, 1918-
Published: (1957)

Tensile properties of 7075-T6 and 2024-T3 aluminum-alloy sheet heated at uniform temperature rates under constant load /
by: Heimerl, George J.
Published: (1955)

Shear lag in box beams methods of analysis and experimental investigations /
by: Kuhn, Paul
Published: (1943)

Buckling of thin-walled cylinder under axial compression and internal pressure /
by: Lo, Hsu
Published: (1950)

Experimental study of deformation and of effective width in axially loaded sheet-stringer panels /
by: Ramberg, Walter
Published: (1939)

Stress producing effects of equivalent design loads on modern highway bridges /
by: Stephenson, Henson K. (Henson Knowlen), 1897-1978, et al.
Published: (1953)

Shear Thickening Fluid : Case Studies in Engineering /
Published: (2023)

Stress and strain concentration at a circular hole in an infinite plate /
by: Stowell, Elbridge Z.
Published: (1950)

A Unified theory of plastic buckling of columns and plates /
by: Stowell, Elbridge Z.
Published: (1948)

Postbuckling response of long thick plates loaded in compression including higher order transverse shearing effects /
by: Stein, Manuel
Published: (1990)

Finite element techniques for orthotropic plane stress and orthotropic plate analysis /
by: Maki, A. C.
Published: (1968)

A solid-inclusion borehole probe to determine three-dimensional stress changes at a point in a rock mass : development and laboratory testing of a solid-inclusion borehole instrument and the mathematical bases for reduction of the three-dimensional data produced by the instrument /
by: Nichols, Thomas C., et al.
Published: (1968)

Compressive buckling of simply supported curved plates and cylinders of sandwich construction /
by: Stein, Manuel
Published: (1952)

Effect of shear stress on dynamic bulk modulus of sand /
by: Schmertmann, John H.
Published: (1978)

Bending of rectangular plates with large deflections /
by: Wang, Chi-Teh
Published: (1948)

Short-wavelength buckling and shear failures for compression-loaded composite laminates /
by: Shuart, Mark J.
Published: (1985)

A design manual on the buckling strength of metal structures,
by: Bleich, Friedrich, 1878-, et al.
Published: (1970)

Plastic buckling of simply supported compressed plates /
by: Pride, Richard A., et al.
Published: (1949)

Deformation analysis of wing structures /
by: Kuhn, Paul
Published: (1947)

Structures of thin sheet metal : their design and construction /
by: Wagner, Herbert, 1900-1982
Published: (1928)

Structural stability theory and practice : buckling of columns, beams, plates, and shells /
by: Jerath, Sukhvarsh
Published: (2021)