Handbook of structural stability. Part 3, Buckling of curved plates and shells /

Handbook of structural stability.
by: Gerard, George
Published: (1957)

Handbook of structural stability.
by: Gerard, George
Published: (1957)

Handbook of structural stability.
by: Becker, Herbert, 1918-
Published: (1957)

Effect of normal pressure on the critical compressive and shear stress of curved sheet /
by: Rafel, Norman
Published: (1945)

Critical combinations of shear and direct axial stress for curved rectangular panels /
by: Schildcrout, Murry
Published: (1949)

Modern experimental stress analysis : the solution of partially specified problems /
by: Doyle, James F., 1951-
Published: (2004)

Local instability of centrally loaded columns of channel section and Z℗--section.
Published: (1939)

Tables of stiffness and carry-over factor for flat rectangular plates under compression /
by: Kroll, W. D.
Published: (1943)

Critical combinations of shear and longitudinal direct stress for long plates with transverse curvature /
by: Batdorf, S. B., et al.
Published: (1947)

Principles of moment distribution applied to stability of structures composed of bars or plates /
by: Lundquist, Eugene E.
Published: (1948)

Critical combinations of torsion and direct axial stress for thin-walled cylinders /
by: Batdorf, S. B.
Published: (1947)

Significant changes to the minimum design load provisions of ASCE 7-16 /
by: Chock, Gary
Published: (2018)

Experimental investigation of the effects of plastic flow in a tension panel with a circular hole /
by: Griffith, George E.
Published: (1948)

Critical stress for an infinitely long flat plate with elastically restrained edges under combined shear and direct stress /
by: Stowell, Elbridge Z.
Published: (1943)

Structural and stress analysis /
by: Megson, T. H. G.
Published: (2000)

The stability under longitudinal compression of flat symmetric corrugated-core sandwich plates with simply supported loaded edges and simply supported or clamped unloaded edges /
by: Seide, Paul
Published: (1952)

Fundamentals of structural mechanics /
by: Hjelmstad, Keith D.
Published: (2005)

Stress in ASME pressure vessels, boiler and nuclear components /
by: Jawad, Maan H.
Published: (2018)

A Method of calculating the compressive strength of Z-stiffened panels that develop local instability /
by: Gallaher, George L.
Published: (1947)

Engineering mechanics /
by: Hartsuijker, C.
Published: (2007)

Effect of normal pressure on the critical compressive stress of curved sheet /
by: Rafel, Norman
Published: (1942)

Tension fields in originally curved, thin sheets during shearing stresses /
by: Wagner, H., et al.
Published: (1935)

Mechanics of civil engineering structures /
by: Kollar, L. Peter (Laszlo Peter), 1926-, et al.
Published: (2021)

The effect of internal pressure on the buckling stress of thin-walled circular cylinders under torsion /
by: Crate, Harold, et al.
Published: (1944)

Engineering mechanics /
Published: (2006)

Some elementary principles of shell stress analysis with notes on the use of the shear center.
Published: (1939)

Buckling of suspended cambered girders /.
by: Peart, Walter Lee, 1962-
Published: (1990)

Torsion and buckling of open sections.
Published: (1936)

Torsion and buckling of open sections.
Published: (1936)

Building physics : from physical principles to international standards /
by: Pinteric, Marko
Published: (2017)

Vibration and structural acoustics analysis : current research and related technologies /
Published: (2011)

Structural sensitivity analysis and optimization /
by: Choi, Kyung K.
Published: (2005)

Structural analysis /
by: Kassimali, Aslam
Published: (2020)

Understanding and using structural concepts /
by: Ji, Tianjian, et al.
Published: (2016)

Structural analysis /
by: Cirulis, Mikus, et al.
Published: (2015)

Structural cross-sections : analysis and design /
by: Anwar, Naveed, et al.
Published: (2017)