Methodology of crevice corrosion testing for stainless steels in natural and treated seawaters /
| Corporate Authors: | , , |
|---|---|
| Other Authors: | , , |
| Format: | eBook |
| Language: | English |
| Published: |
Leeds :
Maney Pub.,
2010.
|
| Series: | Publications (European Federation of Corrosion) ;
no. 60. |
| Subjects: | |
| Online Access: | Connect to the full text of this electronic book |
Table of Contents:
- ""Title page""; ""Half title""; ""Contents""; ""European Federation of Corrosion (EFC) publications: Series introduction""; ""Volumes in the EFC series""; ""Preface""; ""1 Crevice corrosion from a historical perspective""; ""1.1 Introduction""; ""1.2 The mechanism""; ""1.3 The ferric chloride test""; ""1.4 Field tests""; ""1.5 Electrochemical tests""; ""1.6 Conclusions""; ""2 Objectives and background""; ""2.1 Introduction""; ""2.2 Establishment of the state-of-the-art""; ""2.3 Formulation of a new synthetic seawater""; ""2.4 Electrochemically controlled crevice corrosion test""
- ""2.5 Inter-comparison testing""""3 Laboratory calibration""; ""3.1 âß?Calibrationâß? of participating laboratories in the project""; ""3.2 Experimental procedure""; ""3.3 Test results""; ""3.3.1 Weight loss""; ""3.3.2 Number of etchings/attacks""; ""3.3.3 Maximum depth of attack""; ""3.4 Conclusions from the âß?calibrationâß? test""; ""4 Crevice formers for specimens of plate material""; ""4.1 Optimisation of test parameters of importance for crevice corrosion testing""; ""5 Crevice corrosion testing of tubes""; ""5.1 Introduction""; ""5.2 Experimental""; ""5.2.1 Materials""
- ""5.2.2 Design of crevice former""""5.2.3 Finite Element Method Modelling""; ""5.2.4 Crevice corrosion testing""; ""5.3 Results""; ""5.3.1 Finite Element Method modelling""; ""5.3.2 Crevice corrosion testing""; ""5.4 Discussion""; ""5.4.1 Specimen area""; ""5.4.2 Crevice former""; ""5.4.3 Clamping force""; ""5.4.4 Proposed crevice former procedure for tube specimens""; ""5.5 Crevice corrosion testing of stainless steel tubes applied as umbilicals""; ""5.6 Conclusions from crevice corrosion testing of tubes""; ""6 Formulation of new synthetic seawater for aerobic environment""
- ""6.1 Introduction""""6.2 Experimental""; ""6.3 Electrochemical tests""; ""6.4 Crevice corrosion experiments""; ""6.4.1 After test examination""; ""6.4.2 Chemical method versus the biochemical method""; ""6.4.3 Influence of the tank material""; ""6.4.4 Influence of the cathodic area""; ""6.4.5 Influence of stainless steel grades""; ""6.4.6 Influence of chemicals and biochemicals""; ""6.4.7 Influence of temperature""; ""6.4.8 Influence of the crevice holder system""; ""6.5 Conclusions""; ""7 Simulation of anaerobic environments""; ""7.1 Introduction""; ""7.2 Experimental""
- ""7.3 Results and discussion""""7.3.1 Influence of the polarisation scanning rate""; ""7.3.2 Breakdown potentials in sterile aerated seawater""; ""7.3.3 Breakdown potentials in anaerobic seawater with SRB""; ""7.3.4 Breakdown potentials Na2S solution""; ""7.4 Conclusion""; ""8 Synergy of aerobic and anaerobic conditions""; ""8.1 Introduction""; ""8.2 Synergy of aerobic and anaerobic biofi lms on EN 1.4404""; ""8.3 Synergy of aerobic and anaerobic biofi lms on EN 1.4462 and EN 1.4547""; ""8.4 Laboratory simulation of the synergy""; ""8.5 Conclusion""