Atlas of stress-strain curves.

Prevention of the failure of metals under repeated stress : a handbook prepared for the Bureau of aeronautics, Navy department, by the staff of Battelle memorial institute, under the auspices of the National research council of the National academy of sciences.
Published: (1941)

Inspection of metals : understanding the basics /
Published: (2013)

The initial buckling behavior of flat and curved fiber metal laminate panels /
by: Verolme, K.
Published: (1998)

Metallic materials : determination of forming-limit curves for sheet and strip.
Published: (2021)

Residual stress measurements /
Published: (1952)

Evaluation of residual stress.
by: Heindlhofer, Kalman
Published: (1948)

Symposium on deformation of metals as related to forming and service /
Published: (1949)

The fracture of metals /
by: Gensamer, Maxwell, 1902-
Published: (1947)

The Generation of isochronous stress-strain curves /
Published: (1972)

Designing against fatigue of metals.
by: Heywood, Roland Bryon
Published: (1962)

Fracturing of metals : a seminar on the fracturing of metals held during the Twenty-ninth National Metal Congress and Exposistion, Chicago, October 18 to 24, 1947 ... /
Published: (1948)

Stress concentration design factors ; charts and relations useful in making strength calculations for machine parts and structural elements.
by: Peterson, Rudolph Earl, 1901-
Published: (1953)

Plasticity of metals at finite strain : theory, experiment, and computation : proceedings of research workshop held at Stanford University, July 29, 30, July 1, 1981 /
Published: (1982)

Metallic materials : determination of forming-limit curves for sheet and strip.
Published: (2020)

Failures in wire baskets of ureteral stone dislodgers /
by: Christ, B. W.
Published: (1969)

Thermal stress and strain generation in heat treatment /
by: Fletcher, A. J.
Published: (1989)

Failure of materials in mechanical design : analysis, prediction, prevention /
by: Collins, J. A. (Jack A.)
Published: (1981)

Fatigue as a design criterion /
by: Duggan, Terance V.
Published: (1977)

Crack dynamics in metallic materials /
Published: (1990)

Materials data for cyclic loading /
by: Boller, Chr
Published: (1987)

High temperature design data for ferritic pressure vessel steels /
Published: (1983)

Metal matrix composites in industry : an introduction and a survey /
by: Evans, Alexander
Published: (2003)

Metal fatigue /
by: Frost, N. E. (Norman Edward), 1923-
Published: (1999)

Methods and practice for stress and strain measurement.
Published: (1977)

Stationary and propagative instabilities in metals : a computational point of view /
by: Wang, Wei Min, 1961-
Published: (1997)

Symposium on fatigue of aircraft structures : presented at the third Pacific area national meeting, San Francisco, Calif., October 14-15, 1959.
Published: (1960)

Strain measurements and stress analysis /
by: Khan, Akhtar S.
Published: (2001)

A photoelastic study of slip on an artificial fault in a multilayered medium /
by: Coyne, John Christopher
Published: (1979)

Fracture toughness evaluation by R-curve methods.
Published: (1973)

Mechanical response of an Al-PTFE composite to uniaxial compression over a range of strain rates and temperatures /
by: Casem, Daniel T.
Published: (2008)

Plasticity ; a mechanics of the plastic state of matter /
by: Nádai, Arpád, 1883-1963
Published: (1931)

Theory of flow and fracture of solids.
by: Nádai, Arpád, 1883-1963
Published: (1950)

Deformation and failure in metallic materials /
Published: (2003)

Mechanics of metals /
by: D'Isa, Frank A., 1921-
Published: (1968)

Relaksat︠s︡ii︠a︡ napri︠a︡zheniĭ v metallakh /
by: Gint︠s︡burg, I︠A︡. S.
Published: (1957)

The use of particulate mechanics in the simulation of stress-strain characteristics of granular materials /
by: Armstrong, James C.
Published: (1966)