Cover Image

Understanding and mitigating tip leakage and endwall losses in high pressure ratio cores /

Bibliographic Details
Main Author:	Christophel, Jesse (Author)
Corporate Author:	Fundamental Aeronautics Program (U.S.) (sponsoring body.)
Format:	Government Document eBook
Language:	English
Published:	Cleveland, Ohio : National Aeronautics and Space Administration, Glenn Research Center, August 2015.
Series:	NASA contractor report ; NASA CR-2015-218854.
Subjects:	Flow distribution. Axial flow turbines. Leakage. Turbine blades. Prediction analysis techniques.
Online Access:	https://purl.fdlp.gov/GPO/gpo64459 http://purl.fdlp.gov/GPO/gpo64459

Similar Items

Performance of a high-work, low-aspect-ratio turbine tested with a realistic inlet radial temperature profile /
by: Stabe, Roy G.
Published: (1984)

Axial-flow turbine rotor discharge-flow overexpansion and limit-loading condition.
by: Chen, Shu-Cheng S.
Published: (2017)

Comparison of various supersonic turbine tip designs to minimize aerodynamic loss and tip heating /
by: Shyam, Vikram
Published: (2012)

Endwall heat transfer measurements in a transonic turbine cascade /
by: Giel, P. W.
Published: (1996)

Effects of tip clearance and casing recess on heat transfer and stage efficiency in axial turbines /
by: Ameri, Ali A.
Published: (1998)

Prediction of relaminarization effects on turbine blade heat transfer /
by: Boyle, Robert J.
Published: (2001)

Experimental performance and analysis of 15.04-centimeter-tip-diameter, radial-inflow turbine with work factor of 1.126 and thick blading /
by: McLallin, Kerry L., et al.
Published: (1980)

Computational investigation of novel tip leakage mitigation methods for high pressure turbine blades /
by: Ibrahim, Mounir B., et al.
Published: (2014)

Toward understanding tip leakage flows in small compressor cores including stator leakage flow /
by: Berdanier, Reid A., et al.
Published: (2017)

Aerodynamic investigation of incidence angle effects in a large scale transonic turbine cascade /
by: McVetta, Ashlie B., et al.
Published: (2013)

A guide to axial-flow turbine off-design computer program AXOD2 /
by: Chen, Shu-cheng S.
Published: (2014)

Blade tip rubbing stress prediction : final report /
by: Davis, Gary A.
Published: (1991)

Integrated turbine tip clearance and gas turbine engine simulation /
by: Chapman, Jeffryes W.
Published: (2016)

Capability extension to the turbine off-design computer program AXOD with applications to the highly loaded fan-drive turbines /
by: Chen, Shu-cheng S.
Published: (2011)

Laser anemometer measurements in a transonic axial-flow fan rotor /
Published: (1989)

Navier-Stokes analysis of turbine blade heat transfer /
by: Boyle, Robert J.
Published: (1990)

High pressure turbine test hardware detailed design report /
by: Halila, E. E., et al.
Published: (1982)

On the physics of flow separation along a low pressure turbine blade under unsteady flow conditions /
by: Schobeiri, Meinhard, et al.
Published: (2003)

Gust response analysis of a turbine cascade /
Published: (2001)

Gust response analysis of a turbine cascade /
by: Gorla, Rama S. R.
Published: (2001)

An experimental investigation of the flow physics associated with end wall losses and large rotor tip clearances as found in the rear stages of a high pressure compressor /
by: Berdanier, Reid A., et al.
Published: (2015)

Aerodynamic measurements of a variable-speed power-turbine blade section in a transonic turbine cascade /
by: Flegel, Ashlie B.
Published: (2014)

A reduced model for prediction of thermal and rotational effects on turbine tip clearance /
by: Kypuros, Javier A.
Published: (2003)

Flow control under low-pressure turbine conditions using pulsed jets : final report /
by: Volino, Ralph John, et al.
Published: (2012)

Three-dimensional flow field measurements in a transonic turbine cascade /
by: Giel, P. W.
Published: (1996)

Enhanced design of turbo-jet LPT by separation control using phased plasma actuators /
by: Corke, Thomas C.
Published: (2003)

Channel flow modeling of impingement cooling of a rotating turbine blade /
by: Koo, JaHye Jenny
Published: (1984)

Turbine blade and vane heat flux sensor development phase II /
by: Atkinson, W. H., et al.
Published: (1985)

An experimental study of the effect of wake passing on turbine blade film cooling /
by: Heidmann, James D.
Published: (1997)

Experimental and numerical investigation of losses in low-pressure turbine blade rows /
by: Dorney, Daniel J.
Published: (2000)

Heat transfer in a complex trailing edge passage for a high pressure turbine blade.
by: Rigby, D. L. (David Lester), 1963-
Published: (2002)

Evaluation of an active clearance control system concept /
Published: (2005)

Investigation of exoskeletal engine propulsion system concept /
Published: (2005)

Aerodynamic investigation of incidence angle effects in a large scale transonic turbine cascade /
by: McVetta, Ashlie B., et al.
Published: (2014)

Probabilistic analysis of bladed turbine disks and the effect of mistuning /
by: Shah, A. R.
Published: (1990)

Model 0A wind turbine generator FMEA /
by: Klein, William E.
Published: (1989)

Predicted turbine heat transfer for a range of test conditions /
by: Boyle, Robert J., et al.
Published: (1996)

A study of fan stage/casing interaction models /
by: Lawrence, Charles, 1957-
Published: (2003)

Experimental investigation of transition to turbulence as affected by passing wakes /
by: Kaszeta, Richard W.
Published: (2002)

Current Lewis turbomachinery research : building on our legacy of excellence /
by: Povinelli, Louis A.
Published: (1997)