Feasibility demonstration of booster cross-over system for 3 ư inch SRB/MLP frangible nut for NASA Marshall Space Flight Center.

Liquid flyback booster pre-phase A study assessment /
Published: (1994)

Final report on the SRB frustrum "Smiley" cracking phenomenon study /
by: Cruse, Thomas A.
Published: (1993)

Process sensitivity, performance, and direct verification testing of adhesive locking features /
by: Golden, Johnny L.
Published: (2012)

SRB thermal curtain design support : October 1990 interim report to U.S. Polymeric, B.P. Chemicals /
by: Lundblad, Wayne E.
Published: (1990)

SRB O-ring free response analysis /
by: Moore, Carleton J.
Published: (1986)

Solid rocket booster thrust vector control subsystem description /
Published: (1983)

Experimental aerodynamic characteristics of the Pegasus air-launched booster and comparisons with predicted and flight results /
by: Rhode, Matthew N., et al.
Published: (1995)

Supersonic aerodynamic characteristics of a circular body Earth-to-orbit vehicle /
by: Ware, George M., et al.
Published: (1994)

Finite element simulation of a space shuttle solid rocket booster aft skirt splashdown using an arbitrary Lagrangian-Eulerian approach /
by: Melis, Matthew E.
Published: (2003)

Dynamic assessment of B-52B-008 carrier aircraft for the revised space shuttle solid rocket booster decelerator subsystem drop test vehicle.
by: Doty, Leslie J.
Published: (1983)

Solid rocket booster joint seal analyses /
by: Moore, Carleton J.
Published: (1987)

Comparison of the booster interface temperature in stainless steel (SS) v-channel versus the aluminum (Al) y-channel Primer Chamber Assemblies (PCAs) /
by: García, Roberto
Published: (2011)

Feasibility study and verified design concept for new improved hot gas facility : final report /
Published: (1986)

Fastener design manual /
by: Barrett, Richard T.
Published: (1990)

Field joint protection system rain qualification /
by: Cook, M.
Published: (1989)

Comparison of separation shock for explosive and nonexplosive release actuators on a small spacecraft panel /
by: Lucy, M. H., et al.
Published: (1996)

RSRM nozzle fixed housing cooldown test final report /
by: Bolieau, D. J.
Published: (1989)

Qualification of improved joint heaters : final test report /
by: Cook, M.
Published: (1989)

Development of a shuttle plume radiation heating indicator : final report /
by: Reardon, John E.
Published: (1988)

Development of constraint force equation methodology for application to multi-body dynamics including launch vehicle stage separation /
by: Pamadi, Bandu N., 1945-
Published: (2016)

Block II solid rocket motor (SRM) conceptual design study : final report /
Published: (1986)

STS-36 space shuttle mission report /
by: Mechelay, Joseph E., et al.
Published: (1990)

An evaluation of the total quality management implementation strategy for the advanced solid rocket motor project at NASA's Marshall Space Flight Center /
by: Schramm, Harry F.
Published: (1991)

Ignition overpressure study from solid rocket motor firings /
by: Counter, Douglas D.
Published: (1987)

Performance characterization of Loctite® 242 and 271 liquid locking compounds (LLCs) as a secondary locking feature for International Space Station (ISS) fasteners /
by: Dube, Michael J.
Published: (2011)

Combustion of Velcro in low gravity /
by: Olson, Sandra L. (Sandra Lee)
Published: (1987)

Structural sizing of a 25 000-lb payload, air-breathing launch vehicle for single-state-to-orbit /
by: Roche, Joseph M., et al.
Published: (2001)

Cable coupling lightning transient qualification : final test report /
by: Cook, M.
Published: (1989)

Supersonic wind tunnel tests of a half-axisymmetric 12⁰-spike inlet to a rocket-based combined-cycle propulsion system /
by: DeBonis, J. R.
Published: (2001)

Supersonic wind tunnel tests of a half-axisymmetric 12°-spike inlet to a rocket-based combined-cycle propulsion system /
by: DeBonis, James R., et al.
Published: (2001)

Characterization and analysis of aerosol particle retention and re-aerosolization from hook-and-loop fasteners on the international space station /
by: Boyajian, Barbara, et al.
Published: (2018)

Test report for MSFC test #83-2 : pressure scaled water impact test of a 12.5 inch diameter model of the space shuttle solid rocket booster filament wound case and external TVC POD.
Published: (1983)

NASA Glenn's contributions to aircraft engine noise research /
by: Huff, Dennis L.
Published: (2013)

QM-8 final performance evaluation report.
by: Nelsen, Lowell V.
Published: (1989)

Hybrid propulsion technology program : final report.
Published: (1990)

Development and testing of harpoon-based approaches for collecting comet samples /
by: Wegel, Donald
Published: (2017)