Cover Image

Nozzle ring settings on low pressure water-relief valves.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, [1992]
Series:	NRC information notice ; 92-64.
Subjects:	Nuclear power plants > Piping > Valves > United States.
Online Access:	https://purl.fdlp.gov/GPO/gpo71240

Similar Items

Problems with Copes-Vulcan pressurized power-operated relief valves.
Published: (1994)

Inaccuracy of safety valve set pressure determinations using assist devices.
Published: (1994)

Malfunction of a pressurized code safety valve.
Published: (1993)

Valve stem corrosion failures.
Published: (1985)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Degradation of scram solenoid pilot valve pressure and exhaust diaphragms.
Published: (1994)

Periodic verification of leak tight integrity of pressure isolation valves.
Published: (1987)

Effects of changing valve motor-operator switch settings.
Published: (1986)

Changes In pressurizer safety valve setpoints before installation.
Published: (1991)

Failure of check and stop check valves subjected to low flow conditions.
Published: (1986)

Air actuator and supply air regulator problems in Copes-Vulcan pressurizer power-operated reliel valves.
Published: (1995)

Main steam safety valve test failures and ringed setting adjustments.
Published: (1986)

Pressure locking of motor-operated flexible wedge gate valves.
Published: (1992)

Check valve problems.
Published: (1982)

Excessive nitrogen supply pressure actuates safety-relief valve operation to cause reactor depressurization.
Published: (1980)

Potentially substandard valve replacement parts.
Published: (1988)

Pressurizer safety valve reliability.
Published: (1986)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Failure of three check valves on high pressure injection lines to pass flow.
Published: (1982)

Boiling water reactor safety/relief valve failures.
Published: (1983)

Velan swing check valves.
Published: (1981)

Testing and operations-induced degradation of 3-stage Target Rock safety/relief valves.
Published: (2018)

Instrument failure causes opening of PORV and block valve.
Published: (1980)

Failure of air check valves to seat.
Published: (1985)

Unexpected opening of multiple safety relief valves.
Published: (1996)

Vibration-induced degradation and failure of safety-related valves.
Published: (2006)

Potential failure of motor-operated butterfly valves to operate because valve seat friction was underestimated.
Published: (1990)

Potential overstress of shafts on Fisher series 9200 butterfly valves with expandable T rings.
Published: (1981)

Failures of main steam isolation valves.
Published: (1988)

Broken retaining block studs on Anchor Darling check valves.
Published: (1988)

Valve body erosion.
Published: (1989)

Check valve failures.
Published: (1981)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Horizontally-installed motor-operated gate valves.
Published: (1992)

Setpoint testing of pressurizer safety valves with filled loop seals using hydraulic assist devices.
Published: (1988)

Dependency of offset disc butterfly valve's operation on orientation with respect to flow.
Published: (1991)

Failures of nut-locking devices in check-valves.
Published: (1993)

Motor-operated valve failures due to hammering effect.
Published: (1985)

Multiple-subsequent actuation of safety/relief valves following an isolation event.
Published: (1978)