Cover Image

Barriers and seals between mild and harsh environments.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : United States Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, [1992]
Series:	NRC information notice ; 92-52.
Subjects:	Nuclear facilities > Electric equipment > Safety measures. Electric switchgear > Safety measures. Seals (Closures)
Online Access:	https://purl.fdlp.gov/GPO/gpo71228

Similar Items

Erratic behavior of static "O" ring differential pressure switches.
Published: (1986)

Weschler Instruments model 252 switchboard meters.
Published: (1993)

Four-channel threshold detector with optical isolation /
by: Morgenstern, Mark R.
Published: (2009)

Performance of metal and polymeric o-ring seals in beyond-design-basis temperature excursions /
by: Yang, Jiann C. (Jiann Chyuan)
Published: (2012)

Performance of metal and polymeric o-ring seals in beyond-design-basis temperature excursions /
by: Yang, Jiann C. (Jiann Chyuan)
Published: (2015)

RCP seal replacement with pump on backseat.
Published: (1996)

Failures caused by an improperly adjusted test link in 4.16 KV General Electric switchgear.
Published: (1991)

Permanent deformation of torque switch helical springs in Limitorque SMA-type motor operators.
Published: (1989)

Malfunctions of ITT Barton model 580 series switches during requalification testing.
Published: (1986)

Commission decision on the resolution of generic issue 23 " Reactor coolant pump seal failure".
Published: (1995)

Problems with the use of unshielded test leads in reactor protection system circuitry.
Published: (1993)

Auxiliary feedwater pump lockout resulting from Westinghouse W-2 switch circuit modification.
Published: (1982)

Failures of Class 1E safety-related switchgear circuit breakers to close on demand.
Published: (1983)

Isolation & switching /
Published: (2009)

Cable damage caused by inadequate cable installation procedures and controls.
Published: (1992)

Inadequate verfication of overcurrent trip setpoints in metal-clad, low-voltage circuit breakers.
Published: (1998)

Seismic qualification of Westinghouse AR relay with latch attachments used in system.
Published: (1982)

Emergency electrical services.
Published: (1964)

Electrical hazards and accidents : their cause and prevention /
Published: (1991)

Modification of surveillance interval for the electrical protective assemblies in power supplies for the reactor protection.
Published: (1991)

Improper installation of Patel conduit seals.
Published: (1990)

Packaging closures and sealing systems /
Published: (2006)

Failure of undervoltage trip attachment on General Electric circuit breakers.
Published: (1988)

Failure of undervoltage trip attachment on Westinghouse Model DE-50 reactor trip breaker.
Published: (1993)

Isolation transfer switches and post-fire shutdown capability.
Published: (1985)

Working safely with electricity.
Published: (2004)

Determination of Westinghouse reactor coolant pump seal failure.
Published: (1993)

Current fire endurance test results for thermo-lag fire barrier material.
Published: (1992)

Residential construction academy : electrical principles /
by: Herman, Stephen L.
Published: (2003)

Hospital electrical safety simplified /
by: Spooner, Robert B., 1920-
Published: (1980)

Information regarding the program for environmental qualification of safety-related electrical equipment.
Published: (1981)

Qualification of safety related electrical equipment.
Published: (1980)

Orders on environmental qualification of safety related electrical equipment.
Published: (1980)

Deficient electrical terminations identified in safety-related components.
Published: (1988)

Modified enforcement policy relating to 10 CFR 50.49, "Environmental qualification of electrical equipment important to safety for nuclear power plants".
Published: (1988)

Potential problems caused by single failure of an engineered safety feature swing bus.
Published: (1988)

Anchorage and support of safety-related electrical equipment.
Published: (1980)

Environmental qualification of safety-related electrical equipment.
Published: (1982)

Issuance of NUREG-0588, "Interim staff position on equipment qualifications of safety-related electrical equipment".
Published: (1980)

Commission memorandum and order of May 23, 1980 (referencing IEB 79-01b Supplement 2--q.2 & 3--Sept 30, 1980).
Published: (1980)