Cover Image

Cladding behavior during postulated loss-of-coolant accidents /

Bibliographic Details
Main Author:	Billone, M. C. (Author)
Corporate Author:	U.S. Nuclear Regulatory Commission. Division of Systems Analysis (sponsoring body.)
Format:	Government Document eBook
Language:	English
Published:	Washington, DC : United States Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, July 2016.
Subjects:	Nuclear power plants > Piping > Valves > Testing. Nuclear power plants > Instruments > Testing.
Online Access:	https://purl.fdlp.gov/GPO/gpo70902

Similar Items

Guidelines for inservice testing at nuclear power plants : inservice testing of pumps and valves and inservice examination and testing of dynamic restraints (snubbers) at nuclear power plants, final report /
by: Bedi, Gurjendra S.
Published: (2013)

Setpoint testing of pressurizer safety valves with filled loop seals using hydraulic assist devices.
Published: (1988)

Safety-related (1) motor-operated valve testing and surveillance results of the public workshops.
Published: (1989)

Check valve inservice testing program deficiencies.
Published: (1988)

Preliminary results of validation testing of motor-operated valve diagnostic equipment.
Published: (1991)

NRC inspections of programs being developed at nuclear power plants in response to Generic Letter 89-10.
Published: (1992)

Inadequate surveillance and postmaintenance and postmodification system testing.
Published: (1985)

Accuracy of motor-operated valve diagnostic equipment (responses to supplement 5 to Generic Letter 89-10).
Published: (1994)

Malfunction of a pressurized code safety valve.
Published: (1993)

Inoperability of power-operated relief valves masked by downstream indications during testing.
Published: (1996)

Recent NRC-sponsored testing of motor-operated valves.
Published: (1989)

Results of NRC-sponsored testing of motor-operated valves.
Published: (1990)

Detached check valve disc not detected by use of acoustic and magnetic nonintrusive test techniques.
Published: (2000)

Testing of parallel disc gate valves in Europe.
Published: (1990)

Inadequate testing to detect failures of safety-related pneumatic components or systems.
Published: (1986)

Results of validation testing of motor-operated valve diagnosis equipment.
Published: (1992)

Main steam isolation valve failure to close on demand because of inadequate maintenance and testing.
Published: (1994)

Plant outage events involving poor coordination between operations and maintenance personnel during valve testing and manipulations.
Published: (1991)

Reduction of reactor coolant inventory because of misalignment of RHR valves.
Published: (1986)

Motor-operated valve actuator thrust variations measured with a torque thrust cell and a strain gage.
Published: (1993)

Main steam safety valve test failures and ringed setting adjustments.
Published: (1986)

Inadequate local leak rate testing.
Published: (1992)

Potential for surveillance testing to fail to detect an inoperable main steam isolation valve.
Published: (1994)

Accuracy of motor-operated valve diagnostic equipment manufactured by Liberty Technologies.
Published: (1993)

Thermally induced pressure locking of a high pressure coolant injection valve.
Published: (1996)

Suceptibility of low-pressure coolant injection and core spray injection valves to pressure locking.
Published: (1995)

Valve stem corrosion failures.
Published: (1985)

Periodic verification of design-basis capability of safety-related motor-operated valves.
Published: (1996)

Potential for gas binding of high-pressure safety injection pumps during a loss-of-coolant accident.
Published: (1988)

Locking devices inadequately installed on main steam isolation valves.
Published: (1981)

Potential effect of line-induced vibration on certain target rock solenoid-operated valves.
Published: (1985)

Inadequate inservice testing of main steam isolation valves.
Published: (1985)

Potentially substandard valve replacement parts.
Published: (1988)

LWR primary coolant system pressure isolation valves.
Published: (1980)

Reversed differential pressure instrument sensing lines.
Published: (1984)

Degraded ability to isolate the reactor coolant system from low-pressure coolant systems in BWRS.
Published: (1986)

Alleged falsification of certifications and alteration of markings on piping, valves, and fittings.
Published: (1985)

Multiple-subsequent actuation of safety/relief valves following an isolation event.
Published: (1978)

Maintenance deficiency associated with solenoid-operated valves.
Published: (1990)

Failure of air check valves to seat.
Published: (1985)