Cover Image

Failure of primary system compression fitting.

Bibliographic Details
Format:	Government Document eBook
Language:	English
Published:	Washington, D.C. : U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, [1992]
Series:	NRC information notice ; 92-15.
Subjects:	Pressurized water reactors > United States > Loss of coolant. Tubes > Defects.
Online Access:	https://purl.fdlp.gov/GPO/gpo66501

Similar Items

Asymmetric blowdown loads on PWR primary systems : resolution of generic task action plan A-2 /
by: Hosford, S. B. (Steve B.)
Published: (1981)

Potential for common-mode failure of high pressure safety injection pumps or release of reactor coolant outside containment during a loss-of-coolant accident.
Published: (1990)

Potential for degradation of the emergency core cooling system and the containment spray system after a loss-of-coolant accident because of construction and protective coating deficiencies and foreign material in containment.
Published: (1998)

Loss of reactor coolant inventory and associated potential for loss of emergency mitigation functions while in a shutdown condition.
Published: (1998)

Intersystem LOCA outside containment.
Published: (1992)

Inter-system discharge of reactor coolant.
Published: (1990)

Depressurization of reactor coolant systems in pressurized-water reactors.
Published: (1987)

Audit of small break LOCA guidelines.
Published: (1979)

Loss of residual heat removal (RHR) while the reactor coolant system (RCS) is partially filled.
Published: (1987)

Potential for loss of emergency cooling function due to a combination of operational and post-LOCA debris in containment.
Published: (1993)

Phenomena identification and ranking table evaluation of chemical effects associated with generic safety issue 191 /
Published: (2009)

Experimental measurements of pressure drop across sump screen debris beds in support of generic safety issue 191 /
Published: (2007)

Hydrogen:air:steam flammability limits and combustion characteristics in the FITS vessel /
by: Marshall, Billy W.
Published: (1986)

2D/3D Program work summary report /
Published: (1993)

Potential degradation of post loss-of-coolant recirculation capability as a result of debris.
Published: (1996)

Resultls of chemical effects head loss tests in a simulated PWR sump pool environment.
Published: (2005)

Assessment study of RELAP-5 MOD-2 cycle 36.01 : based on the Doel-2 steam generator tube rupture incident of June 1979 /
by: Stubbe, E. J. (Elie J.)
Published: (1986)

EB 80-04 analysis of a PWR main steam sine break with continued feedwater addition.
Published: (1980)

Summary of meeting held on October 12, 1979 to discuss responses to IE bulletins 79-05C and 79-06C and HPI termination criteria.
Published: (1979)

Heat transfer processes during intermediate and large break loss-of-coolant accidents (LOCAs) /
by: Vojtek, I.
Published: (1986)

Loss of decay heat removal--10 CFR 50.54(f).
Published: (1988)

Unanalyzed post-LOCA release paths.
Published: (1986)

Possible sudden loss of RCS inventory during low coolant level operation.
Published: (1988)

Core exit temperature response during an SBLOCA event in the Ascó NPP /
by: Freixa, J., et al.
Published: (2018)

Investigations of the VVER-1000 Coolant Transient Benchmark Phase 1 with the coupled code system RELAP5/PARCS /
Published: (2009)

Review of LOFT large break experiments : OCED LOFT project /
by: Modro, S. M.
Published: (1989)

Time step and mesh size dependencies in the heat conduction solution of a semi-implicit, finite difference scheme for transient two-phase flow /
by: O'Mahoney, R.
Published: (1992)

Influence of the wetting state of a heated surface on heat transfer and pressure loss in an evaporator tube /
by: Kohler, W., et al.
Published: (1986)

Assessment of RELAP5/MOD3 with the SNUF test simulating hot leg break LOCA in the view of mass and energy release analysis /
by: Hong, S. Joon
Published: (2001)

RELAP5 assessment using LSTF test data SB-CL-18 /
by: Lee, S. (Sukho), et al.
Published: (1993)

Analysis of the VTI test data on the behavior of the heated rod temperatures in the partially uncovered VVER-440 core model using RELAP5/MOD3.2.2 gamma /
by: Vinogradov, V. A., et al.
Published: (2002)

RELAP5 assessment using semiscale SBLOCA test S-NH-1 /
by: Lee, E. J. (Euy Joon), et al.
Published: (1993)

Assessment of RELAP5/MOD3.2 with the semiscale natural circulation experiment, S-NC-8B /
by: Bang, Y. S. (Young Seok)
Published: (1998)

LBLOCA analysis in a Westinghouse PWR 3-loop design using RELAP5/MOD3 /
by: Sánchez, J. I., et al.
Published: (2001)

RELAP5/MOD3.2 assessment using GERDA small break test, 1605AA /
by: Tietsch, W.
Published: (1999)

Assessment of RELAP5/MOD3.2 using LOFT large break LOCA test, LP-02-6 /
by: Choi, T. S.
Published: (1998)

Analyses of KS test data on the heated rod bundle temperature behavior in RBMK-1500 core model under stop and recovery flow using RELAP5/MOD3.2 and RELAP5/MOD3.2.2 GAMMA /
by: Vinogradov, V. A., et al.
Published: (2001)

Analysis of the THETIS boildown experiments using RELAP5/MOD2 /
by: Croxford, M. G., et al.
Published: (1989)

Simulation of LOCA 6" and LOCA 2" transients in the RHR of a PWR under low power conditions using RELAP5/MOD3.2 /
by: Martorell, S.
Published: (2000)

Study of unusual occurrence of a partial core uncovery in an SBLOCA scenario /
by: Pretel, C., et al.
Published: (2000)